X-Band 50
X-Band 50 Features
- 10 scanning lists and normal/priority scan
- Power ON password
- Backlit LCD and keys for night time operations
- Meets MIL-STD 810 C, D, E and F specifications
Bridging the Gap Between Bands
Connecting VHF to UHF, UHF to UHF, and VHF to VHF, the X-Band 50 provides full UHF and VHF interoperability. This crossband provides an interoperable solution that provides over-the-air programming (OTAP). The X-Band 50 is compact in size, easy to use, and operates as a control station without the need of a network. Inter-agency communications just got easier!
Output Power: |
50W (VHF) / 45W (UHF) | |
Frequencies: |
136-174MHz 400-470MHz |
|
Channels: |
128 | |
Versions: |
UHF/VHF, UHF/UHF, VHF/VHF |
Main Features:
- Local controlled operation; set on a desktop and use as a dual base unit with an optional microphone
- Alpha tag your channels with the 8-Character alphanumeric display
- Configured to auto switch from AC to DC; AC to DC auto select, 220/110/12V capable
- Easily mounts into a 19" rack frame
Advanced Multi 2-Tone/5-Tone Systems
Programmable actions when a matched tone is received
- Bell icon indication ON/OFF/blink
- Answer back calls
- Beep sounds
- Scan start/stop
- Auto transmission
- Stun/kill functions (prevents use of a lost or stolen radio)
- 32 Tx and 9 Rx 5-Tone codes available
- 11 Tx and Rx 2-Tone codes available
 |
Radios, controller, and power supply, all in one box. Dual forced-air fans keep the unit cool. 19" Rack mountable. Battery backup capable. |
 |
A clean rear panel design allows for easy setup and operation. An options connector allows for customized applications such as Interconnect, CWID, and more. |
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
RS-BA1
RS-BA1
RS-BA1 Features
- Low latency provides the same operational experience as using an actual radio plus high quality audio over an IP network.
- Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using CI-V commands.
- Remote power ON/OFF function wakes up the IC-7600 from standby mode.
-
VE-PG4
VE-PG4
VE-PG4 Features
- RoIP Gateway Module
- Links To Existing Radio System
- Built-In RoIP, SIP gateway, IP router, IP PBX and IP communication
- Call Recording To USB Device
- GPS Position and Status Information from IP501H / IP501M LTE
- Serial Pass-Through Function To Extend The Communication Range
- Built-In SIP Server To Connect IP Phones
- Router Functions With VPN Tunnel
- Half-Width 1U Form Design
- Online Firmware Updates
- Management Features
- Despatcher Software
- Built-In Controller For The IP100H
- Easy To Set Up
-
F5121D/F6121D
F5121D/F6121D
F5121D/F6121D FEATURES
- Channels: 128, 8 Zones
- Power: 50W (VHF), 45W (UHF)
- Size, weight: 1.57″H x 5.91″W x 6.59″D, 2.4 lbs.
- Included: microphone, brackets, power cable
- 5 Levels of Mic Gain
- GPS Receiver Connection
- 4W Front-Mounted Speaker
- Lone Worker Function
- Programmable Buttons
- 8-Character Display
- 2/5 Tone
- MDC Signaling
Reviews
There are no reviews yet.