RS-MGR1

RS-MGR1 System Requirements

Operating system (X86/X68 versions)
Windows Vista® SP2 or later
Windows® 7 SP1 or later
Windows® 8 (Except Windows RT)
Windows Server® 2003 SP2 or later
Windows Server® 2008 SP2 or later
Windows Server® 2008 R2 SP1 or later
Windows Server® 2012
Memory: 2GB or higher
Hard disk space: 500GB of minimum disk space 20MB × Number of repeaters × Days for saving logs + 100GB recommended
Display resolution: 1280×1024 Pixel or more recommended
LAN: 100Mbps or faster (Fixed IP address required)
Other: USB 2.0 port, sound card and speaker UC-FR5000 MCU revision 4.00 or later

Category: iCOM Radios

Description
IC-M94D Specifications
Reviews (0)

Remote System Manager Software for IDAS™ NXDN™ Multi-Site Trunking System

The RS-MGR1 system manager software allows you to obtain air time information, network connectivity/statistics and hardware status of the IDAS multi-site trunking repeater sites using syslog messages. The RS-MGR1 stores received syslog messages and reports and analyzes them to assist in system administration and troubleshooting.

Main Features

Repeater properties show condition summary, system information, interface (traffic statistics), repeater condition details (TX/RX PLL unlock, power supply voltage, internal temperature and fan status) and ping status of each repeater
Registration log, communication log, traffic log and search log can be filtered by date, user ID, call type and site code*
*Filter items differ from log types
E-mail alert notification can be sent to the administrator, if an alarm or disconnect occurs or clears
The "Mesh ping status" shows the connectivity by sending ping commands in all combinations of repeater sites
The "Version list" shows the repeaters firmware revision list
The "Map window" shows repeater site icons laid out on a image file such as a map or network diagram
USB flash drive containing the software and for the hardware key protection
SR-VPN1 VPN router can be monitored on the RS-MGR1 by syslog

Network Diagram

Network diagram

Repeater Properties

Repeater properties

Traffic Log

Traffic log

Mesh Ping Status

Mesh ping status

Version List

Version list

System Settings

System settings

General

Frequency range	Tx	156.025–157.425 MHz
	Rx	156.050–163.275 MHz
	Rx (CH70)	156.525 MHz
	RX (AIS)	162.025 MHz
Usable channel groups		INT, USA, CAN, WX channels
Type of emission		16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain (at 7.2 V DC)	TX (6 W/1 W output)	1500 mA/700 mA (approx.)
Current drain (at 7.2 V DC)	RX (Inter SP/Exter SP Max. audio)	700 mA/350 mA (approx.)
Operating temperature range		–20°C to +60°C; –4˚F to +140˚F
Antenna impedance		50 Ω
Dimensions (W×H×D) (Projections not included)		60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in
Weight (approximately)		357 g ; 12.6 oz (With BP-306, antenna, MB-133)

Transmitter

Output power (Hi/Low)		6 W/1 W
Max. frequency deviation		±5 kHz
Frequency stability		±10 ppm
Spurious emissions		–68 dBc typical

Receiver

Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER)		0.25 μV typical –3 dBμ emf typical –107 dBm
Squelch sensitivity (Threshold)		0.25 μV typical
Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 73 dBμ emf 50 dB typical
Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 73 dBμ emf 50 dB typical
Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 68 dBμ emf 50 dB typical
Hum and noise		40 dB
Audio output power (at 10% distortion)	Internal SP	1500 mW typical (8 Ω load)
Audio output power (at 10% distortion)	External SP	350 mW typical (8 Ω load)

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard	MIL-810 G
Standard	Method	Procedure
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Rain Blowing/Drip	506.5	I, III
Humidity	507.5	II
Salt Fog	509.5	–
Dust Blowing	510.5	I
Immersion	512.5	I
Vibration	514.6	I
Shock	516.6	I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water	IPX7 (Waterproof protection)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

BP-306 battery pack
BC-251 battery charger
AC adapter*
CP-26 cigarette lighter cable
MB-133 belt clip
Antenna
Hand strap

* May differ depending on version

Reviews

There are no reviews yet.

Be the first to review “RS-MGR1”