P25

P25 Features

  • Crisp clear loud audio for demanding environments
  • Available in VHF, UHF, & 700/800MHz
  • Phase 1 and Phase 2 trunking options available
  • Tough and robust with MIL-STD & ingress protection ratings
  • Brilliant full color display with intuitive user interface
    and day/night modes on the F7000/F7500 series
  • Multiple safety features
Category:

P25 Solutions

Project 25 (P25), also known as APCO 25 and ASTRO® 25, is the standardized two-way digital radio communications platform used by government and public safety organizations throughout North America. The primary goal of P25 is to establish an interoperable two-way digital radio communication platform, which is universal between all agencies. Through the use of TIA standards, the platform established a set of manufacturing standards for these interoperable two-way digital communications products to ensure compliance between various radio ecosystems and manufacturers products. Icom is proud to support these ever-advancing P25/TIA standards to ensure we provide the best products to our government and public safety partners.

Icom P25 radios meet these agencies demanding needs and afford the them opportunity to make the most of their budgets, with cost-effective two-way digital radio communications products. Communicating with Icom’s P25 radios using conventional analog, digital, or mixed mode operation as well as optional Phase 1 and Phase 2 trunking options allows customers the ability to upgrade their fleet at their own pace.

General

Frequency range Tx 156.025–157.425 MHz
Rx 156.050–163.275 MHz
Rx (CH70) 156.525 MHz
RX (AIS) 162.025 MHz
Usable channel groups INT, USA, CAN, WX channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain
(at 7.2 V DC)
TX (6 W/1 W output) 1500 mA/700 mA (approx.)
RX (Inter SP/Exter SP Max. audio) 700 mA/350 mA (approx.)
Operating temperature range –20°C to +60°C; –4˚F to +140˚F
Antenna impedance 50 Ω
Dimensions (W×H×D)
(Projections not included)
60.9 × 145.8 × 43.8 mm;
2.4 × 5.7 × 1.7 in
Weight (approximately) 357 g ; 12.6 oz
(With BP-306, antenna, MB-133)

 

 

Transmitter

Output power (Hi/Low) 6 W/1 W
Max. frequency deviation ±5 kHz
Frequency stability ±10 ppm
Spurious emissions –68 dBc typical

 

 

Receiver

Sensitivity (at 12 dB SINAD)
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
0.25 μV typical
–3 dBμ emf typical
–107 dBm
Squelch sensitivity (Threshold) 0.25 μV typical
Adjacent channel selectivity
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Spurious response
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Intermodulation
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
68 dBμ emf
50 dB typical
Hum and noise 40 dB
Audio output power
(at 10% distortion)
Internal SP 1500 mW typical (8 Ω load)
External SP 350 mW typical (8 Ω load)

 

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

 

 

Applicable U.S. Military Specifications & IP Rating

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water IPX7 (Waterproof protection)

 

All stated specifications are subject to change without notice or obligation.

 

 

Supplied Accessories

  • BP-306 battery pack
  • BC-251 battery charger
  • AC adapter*
  • CP-26 cigarette lighter cable
  • MB-133 belt clip
  • Antenna
  • Hand strap

* May differ depending on version

Reviews

There are no reviews yet.

Be the first to review “P25”

Your email address will not be published. Required fields are marked *