NXR-1700E

NXR-1700E

NEXEDGE® VHF ANALOG & DIGITAL REPEATER

 

Frequency Band:
VHF

Frequency Range:
136-174 MHz

Power Output:
50 W

Number of Channels/Groups/Zones:
32 Channel

Channel spacing:
12.5 / 15 / 25 / 30 kHz, 12.5 / 25 kHz Analog
6.25 / 12.5 kHz Digital

NXR-1700E Features

  • 50 - 1 W RF Output Power (Up to 50 W @ 50%, 25 W @ 100% Duty Cycle)
  • 136 - 174 MHz
  • Light, Compact and Space-Efficient
  • 1.71-inch OLED with Icons and Numeric Displays
  • Thermal-Controlled Cooling Fan
  • External Power Supply
  • Up to 32 Channels
  • Dual Digital Protocol: DMR Tier II / NXDN Conventional*2, *3 (programmable one at a time)
  • USB-A Connector Ready for Audio Accessories
  • External In/Out Pin from DB25
  • Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digitall*2, *3
  • Hot Standby System Redundancy
  • Built-in IP Network Adapter
  • Unicast and Multicast Call Routing
  • SNMP Protocol for Direct Reporting to a Generic System*3
  • Supports G.711 Audio Codec (for Test onsole and Third-party Applications)
  • IP Remote Management (Monitor / Control / Programming / Test Console)
  • Ready for IPIF to External Applications (for IP Console, OTAP) / Voice Logging
  • Built-in SIP IF without External IP Console or Gateway (Digital Only)*1, *2, *3
  • IP Remote Control Interface (IPRCI)*3
  • Enhanced Security (HTTPS)
  • CW ID
  • Hang Timer
  • Multi-Site Conventional IP Network up to 16 Sites (for both Digital and Analog)*2
  • IP Networking Compatible with NXR-5000 (NXDN)*2,*3, legacy KTI-3 (NXDN)*2,*3 and KTI-5 (DMR)*2
General NXR-1700E
Frequency Range 136 – 174 MHz
Channel Capacity 32
Channel Spacing
Analog
Digital
30* / 25 */ 15 / 12.5 kHz
12.5 / 6.25 kHz
PLL Channel Step 2.5 / 3.125 / 5 / 6.25 kHz
Power Supply 10.8 – 15.6 V DC
Current Drain
Standby
Transmitting
0.6 A
12.0 A (Max. power), 9.0 A (25 W)
Operating Temperature -22 °F to + 140 °F (-30 ºC to +60 ºC)
Frequency Stability ± 0.5 ppm
Antenna Impedance 50 Ω
Dimensions (W x H x D) Projections Not Included
8.21 x 1.73 x 8.33 in
(208.5 x 44.0 x 211.5 mm)
Weight Radio 4.18 lb (1.9 kg)
FCC ID K44513100
ISED Certification 282F-513100

*25/30 kHz in VHF Band excluding T-Band are not included in the models sold in the USA or US territories. Analog measurements made per TIA603. Specifications are measured according to applicable standards. Specifications shown are typical and subject to change without notice, due to advancements in technology. Details and timing of firmware and software updates are subject to change without notice.

 

Receiver
Sensitivity
DMR (5 % BER)
DMR (1 % BER)
NXDN 12.5 / 6.25 kHz (3% BER)
Analog (12dB SINAD)
0.22 μV
0.28 μV
0.25 / 0.20 µV
0.25 µV
Selectivity
Analog @ 25 / 12.5kHz (TIA603)
Analog @ 25 / 12.5kHz (TIA603E)
83 / 77 dB
80 / 50 dB
FM Hum & Noise
Analog @ 12.5kHz
Analog @ 25kHz
50 dB
55 dB
Intermodulation 80 dB
Spurious Rejection 90 dB
Transmitter
RF Power Output 50 – 1 W (50 W @ 50% Duty, 25 W @ 100 % Duty)
Spurious Emission -80 dB
FM Hum & Noise
Analog @ 12.5kHz
Analog @ 25kHz
50 dB
55 dB
Audio Distortion 1%
Emission Designator 16K0F3E, 11K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60FXW, 7K60F7W,
8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D

NXDN® is a registered trademark of JVCKENWOOD Corporation and Icom Inc.
NEXEDGE® & FleetSync® are a registered trademarks of JVCKENWOOD Corporation.
All other trademarks are the property of their respective holders.