ID-RP2000V / ID-RP4000V
ID-RP2000V (2M)
This VHF digital voice repeater opens the way to use the D-STAR repeater system in the popular 2m band with the ID-800H, IC-91AD and other D-STAR compatible radios. It also provides cross band operation with 144/440/1200MHz bands.
ID-RP4000V (70cm)
The RP4000V, a UHF digital voice repeater, uses the D-STAR repeater system in 70cm bands. It also provides cross band operations with 144/440/1200MHz bands.
ID-RP2000V / ID-RP4000V Description:
ICOM's D-STAR Digital Voice Repeater Modules support handheld, mobile, and base station equipment that utilizes the D-STAR digital voice (DV) protocol. Developed by ICOM in concert with the Japan Amateur Radio League (JARL), D-STAR is the first digital standard to gain amateur radio industry support.
Available for the 2 Meter, 70 cm, and 23 cm bands, these rack-mounted digital repeaters use QPSK modulation to repeat input signals in less than 5.5 kHz of bandwidth. Such a narrow bandwidth makes D-STAR very spectrally efficient! Transmitter power is selectable between a low of 2-3 watts and a high range of 23-30 watts. That's plenty of power to put your repeater site on the map!
These D-STAR Digital Voice Repeaters sport Double-Conversion Super-heterodyne receivers for great sensitivity and selectivity. Utilizing Forward Error Correction, they have a very tolerant bit error rate, nearly to the noise floor, and they typically have less than .45 microvolt sensitivity!
These DV repeaters also support low-speed data transfer on the DV channel that can send short messages between radios or be used for automated functions like GPS location reports, multiple canned-messages up to 20 characters in length, and stored call-sign transmission. Coupled with the D-STAR Repeater Controller, these D-STAR Digital Voice Repeater Modules represent the next giant leap for amateur radio!
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
IC-7700
IC-7700
IC-7700 Upgrade Model Features
- Spectrum Waterfall Display: Review RF and AF characteristics on the IC-7700’s impressive 7-inch color LCD. Includes a wide screen setting.
- PC Mouse Operation: Connect a mouse via USB to select operating frequency and control the spectrum scope.
- Audio Scope Function: Review the FFT scope with waterfall and oscilloscope. In CW mode, observe mic compressor level and other attributes.
- Direct Remote Control Operation: Connect directly to an IP network using Icom’s optional RS-BA1 software and the IC-7700’s internal base station function. (A user operation PC is still required; a base station PC is not.)
- Digital Voice Recorder: Automatically capture incoming/outgoing calls onto an external memory card or flash drive.
-
IC2730A
IC2730A
IC-2730A Features:
- Cross band repeater capability
- CS-2730 Free PC programming software downloads
- Versatile scanning capability
- Squelch delay and squelch attenuator
- Sub band auto mute function
- Auto repeater function
- Auto power off
- TX time-out-timer
- 16 DTMF auto dial memories
- Weather channel receive with weather alert (USA version only)
- CI-V remote control capability (through the optional OPC-478UC)
-
IC-7610
IC-7610
IC-7610 Features
- Built-in automatic antenna tuner
- Digital-Up-Conversion (DUC) for clean transmit
- Dual receivers, dual spectrum scopes
- DVI-D connector for an external display
- SD memory card slot for saving data
- I/Q signal output
- Memo pad stores up to 10 operating frequencies and modes
- Quick split function
- Quick Dualwatch function
- RF gain and squelch control with a knob
- RIT and ΔTX variable up to 9.999 kHz
- UTC/local clock and timer function
- 1 Hz pitch tuning and display
- Dial lock function
- Adjustable main dial brake
- External speaker jacks for Main and Sub receivers
- Screen saver function
- Multi-function meter (S-meter, Power, ALC, COMP, SWR, ID, VD and TEMP)
- Auto tuning step function
-
VE-PG4
VE-PG4
VE-PG4 Features
- RoIP Gateway Module
- Links To Existing Radio System
- Built-In RoIP, SIP gateway, IP router, IP PBX and IP communication
- Call Recording To USB Device
- GPS Position and Status Information from IP501H / IP501M LTE
- Serial Pass-Through Function To Extend The Communication Range
- Built-In SIP Server To Connect IP Phones
- Router Functions With VPN Tunnel
- Half-Width 1U Form Design
- Online Firmware Updates
- Management Features
- Despatcher Software
- Built-In Controller For The IP100H
- Easy To Set Up
Reviews
There are no reviews yet.