IC-V10MR
IC-V10MR Features
- IP67 Waterproof
- Drop Test Durability
- Large Sound for Clear Audio
- Built-in Motion Sensor
- Compact Size to Fit Your Palm
- Signaling for Selective Call
- Large Capacity Battery for Long Operation
- VOX function for hands-free operation
- Audio compander
- Siren sound for security alarm
- Surveillance function temporarily turns OFF the beep and LED indicator
- Emergency call with open microphone function
- Automatic scan
SPECIFICATIONS
| Usable Frequencies and (bandwidth) | 151.820 MHz (11.25 kHz), 151.880 MHz (11.25 kHz), 151.940 MHz (11.25 kHz), 154.570 MHz (20.00 kHz), 154.600 MHz (20.00 kHz) |
|---|---|
| Number of Memory channels | 16 ch |
| Transmit output power | 2 W (High), 1 W (Mid), 0.5 W (Low) |
| Receiver sensitivity | 0.25 μV (typical) for 12 dB SINAD |
| Squelch sensitivity | 0.25 μV (typical) at squelch threshold point |
| Audio output power (at 5% distortion, 8 Ω load) |
Internal SP 1.5 W (typical) External SP 0.4 W (typical) |
| Antenna impedance | 50 Ω |
| Power supply Voltage | 7.5 V |
| Current drain | Receive stand-by 77 mA Receive max. audio 500 mA Transmit (High) 0.9 A |
| Dimensions (with BP-279) | 52.2 (W) × 111.8 (H) × 24.5 (D) mm 2.1 (W) × 4.4 (H) × 1.0 (D) inches |
| Weight (with BP-279) | 240 g; 8.5 oz (approximate) |
All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603.
Applicable U.S. Military Specifications
| Standard | MIL-810 G | ||
|---|---|---|---|
| Method | Procedure | Simple explanation (radio specifications are not changed after each test) |
|
| Low Pressure | 500.5 | I, II | Keep the transceiver 20℃/101.3 kPa and 25℃/57.2 kPa for a total of 7 hours |
| High Temperature | 501.5 | I, II | Keep the transceiver between 30 to 63℃ for a total of 168 hours |
| Low Temperature | 502.5 | I, II | Keep the transceiver at -25℃ for 4 hours |
| Temperature Shock | 503.5 | I-C | Keep the transceiver at -51℃/2 h and +71℃/2 h × 3 cycles (total 12 hours) |
| Solar Radiation | 505.5 | I | Keep the transceiver at 49℃ and 1120 W/m2 for 24 h × 3 cycles (for a total of 72 hours) |
| Rain Blowing/Drip | 506.5 | I, III | I : Blast 1.7 mm/min rain with 18 m/s wind for 30 min to 6 surfaces (for a total of 180 min) III: Drip water 2800 l/m2/h for 15 min. |
| Humidity | 507.5 | II | Keep the transceiver at 95% humidity with 30℃ and 60℃ for 240 hours. |
| Salt Fog | 509.5 | - | Spray 5% salt water with 1-3 ml/h at 80 cm 2 under 35℃/95% condition for 24 hours then dry it under 24℃/50% condition × 2 cycles |
| Dust Blowing | 510.5 | I | Blowing talc powder Temp/time: 23℃/6 h and 60℃/6 h, humidity: less than 30%, wind speed: 8.9 m/s, powder density: 10 ±7 g/m3 |
| Immersion | 512.5 | I | Keep the transceiver in pure water for 1 m / 30 min. |
| Vibration | 514.6 | I | Vibrate the transceiver at each 3 axis (X, Y, Z), frequencies 5 – 500 Hz, 1.05 G for 1 hour |
| Shock | 516.6 | I, IV | When packing, drop 1.22 m height for 6 surfaces, 8 corners, 12 edges (total 26 drops) |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Supplied Accessories
- Battery pack, BP-279
- Belt clip, MB-133
- Rapid charger, BC-213
- AC adapter, BC-242
- Antenna, FA-SC28V