IC-T7H
IC-T7H Sport Features
- Large, easy-to-push PTT switch
- Simple, microphone remote control with the optional HM-75A
- Auto power saver with selectable duty
- Multiple scans provide versatile signal searching
- Auto power off function
- Auto repeater function (USA version only)
- LCD backlight with timer
- 9 DTMF memories
- Channel indication
- Optional cloning software
Powerful Output and Ample Receive Audio
Comfortably sized, with ample receive audio Extra power when you want it, or opt for more power with optional Ni-Cd battery packs – up to 6 watts! Take this go-anywhere sized dual bander on the road and grab more power from any convenience store, grocery store, etc. A full 500 mW (typical) of AF is output from the transceiver's speaker-audio that's easy to copy even in noisy environments.
Meets strict MIL standards, yet is compact
Tested to strict MIL standards, yet is compact The IC-T7Hsport is durably constructed for reliable operation you can count on in the most demanding environments. In fact, it has been tested to and passed the MIL-STD requirements and strict environmental standards for shock and vibration (MIL 810C, D, E). And its compact dimensions of 57(W) × 122(H) × 29(D) mm* mean you can comfortably carry it around in a small bag or even your shirt pocket!
*21⁄4 (W) × 413⁄16 (H) × 11⁄8 (D) in.
A simple operation
A simple band switching system, single push action and thumb-touch lock switches make operation straight-forward and convenient — even for beginners. Additionally, channel indication mode simplifies operation even further and is great for when operating in a group situation.
Built-in tone squelch system
A separate CTCSS tone encoder and CTCSS tone encoder/decoder are standard (38 standard EIA tones and 12 others for even quieter standby). Full programmable band scans and all/band select memory scans provide versatile signal searching. The tone scan function allows you to easily find the subaudible tone needed to access a repeater or to decode a tone squelch signal; the pocket beep function acts like a 'common pager' and alerts you when a matched CTCSS tone frequency is received.
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
RS-BA1
RS-BA1
RS-BA1 Features
- Low latency provides the same operational experience as using an actual radio plus high quality audio over an IP network.
- Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using CI-V commands.
- Remote power ON/OFF function wakes up the IC-7600 from standby mode.
-
IC-7851
IC-7851
IC-7851 Features
- Competitive Advantage: Reciprocal Mixing Dynamic Range
- Twice the Speed, Sensitivity, Resolution and More Control
- Premium Components Yield Premium Performance
- Premium Components Yield Premium Performance
- Operational Functionality for the Most Advanced Operators
-
IC-F7010S and IC-F7010T
IC-F7010S and IC-F7010T
Features
- P25 Phase 1 conventional
- P25 Phase 1 trunking and Phase 2 trunking optional licenses
- P25 voting scan (P25 conventional mode) optional license
- Enhanced dual-rate Vocoder, AMBE+2™
- Analog/digital mixed operation
- Over-the-Air Programming (OTAP) optional license
- Individual and group call
- Unit ID and Talkgroup display on receive
- Status update and status query
- Short data message (up to 100 characters)
- GPS position and transparent data transmission optional license
- Call alert
- Phone number list
- Call log
Reviews
There are no reviews yet.