IC-Q7A
IC-Q7A Features
|
The very compact Icom IC-Q7A covers both the 2 Meter and 440 MHz amateur bands
It also provides exceptional triple conversion receive coverage from 30 to 1300 MHz (less cellular) in AM, FM-N and FM-W.
Ten different tuning steps from 5 kHz to 100 kHz are supported along with six types of scanning. Advanced features include: 200 memories, CTCSS encode/decode, backlit LCD, RIT, Power Save and Lock. Output is 350 mW on 2 Meters and 300 mW on 440 MHz. The latest version of this radio (version IC-Q7A-05) includes: belt clip, SMA flex antenna, wrist strap and the required two AA NiCad cells with BC-127A wall charger. The antenna connector is low loss SMA.
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
IC-SAT100
IC-SAT100
IC-SAT100 Features
- Ready for harsh environments. Water, shock, dustproof with MIL-STD 810G & IP67 waterproof rating
- Operates 100% of the globe
- Built-in emergency key
- Secure communications with AES encryption
- Short Data Message function
- Voice recording function
- Talkgroup Scan
- Priority Interrupt Calling
- Vibration Alert
- Built-in Bluetooth® and GPS Receiver
- Compatible with other Iridium® PTT devices
-
IC-PW2
IC-PW2
IC-PW2 Features
- 1kW output at fully duty cycle, even for extended periods of time
- Six antenna connectors allow customers to use a variety of antennas for multiple bands
- Connect to an Icom radio and all settings are automatically completed
- A LAN port for remote control operation from a PC
- 2×6 antenna selector allows SO2R (single operator two radios) operation with only one amplifier
- Super low-distortion output with superior IMD (Intermodulation Distortion)
- Simultaneous and data output for both Main and Sub bands
- Touch screen color TFT LCD enables intuitive setting changes
-
IC-7100
IC-7100
IC-7100 Features
- Built-in SD card slot for voice storage and data cloning
- Built-in RTTY demodulator and decoder
- CW full break-in, CW receive reverse, CW auto tuning
- Band scope and SWR graphic display
- RF speech compressor controlled by the DSP
- Voice memory function
- Multi-function Meter
- 495 regular, 4 call, 6 scan edge and 900 DR mode repeater channels
- 4 channels TX voice memories
- ±0.5ppm frequency stability
- Auto reply function in D-STAR DV mode
- Digital callsign squelch and digital code squelch in D-STAR DV mode
- 12.5kHz IF output for DRM (Digital Radio Mondiale) receive
- DSP controlled AGC function loop
Reviews
There are no reviews yet.