IC-746
IC-746 Features
|
|
The Icom IC-746 covers 160-10 meters plus 6 and 2 meters
100 Watts of output is available on all bands - HF, 50 MHz and 144 MHz, making the IC-746 a practical choice for all-around base station use. The die-cast aluminum chassis and a large cooling fan help to stabilize the PA circuit, providing 100% full duty cycle operation. It has 100 alphanumeric memories, spectrum display, Twin PBT, CTCSS encode/decode, APF, two stage preamp, keypad entry, automatic antenna tuner and electronic keyer. DSP digitally transposes receive audio components in all modes of operation to produce desired AF frequency characteristics at the IF stage of the transceiver. This built-in DSP provides: noise reduction, automatic notch filter and selectable APF. The digital bar graph meter displays ALC, power output and SWR simultaneously! The radio automatically selects from the three separate antenna inputs (HF, 6 meters, 2 meters). A built-in automatic antenna tuner operates on the HF bands plus 6 meters. The rear panel has three antenna jacks. The 746 requires 12 VDC at 20 Amps.
The IC-746 comes with HM-36 hand mic, spare fuses, DC power cable and key plug. 11.3 x 4.8 x 12.5 inches. 20 lbs.
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
F7500 Series P25
F7500 Series P25
F7500 Series P25 Features
- P25 Phase 1 conventional
- P25 Phase 1 trunking and Phase 2 trunking optional licenses
- P25 voting scan (P25 conventional mode) optional license
- Enhanced dual-rate Vocoder, AMBE+2™
- Analog/digital mixed operation
- Over-the-Air Programming (OTAP) optional license
- Individual and group call
- Unit ID and talkgroup display on receive
- Status update and status query
- Short data message (up to 100 characters)
- GPS position and transparent data transmission optional license
- Call alert
- Phone number list
- Call log
-
IC-PW2
IC-PW2
IC-PW2 Features
- 1kW output at fully duty cycle, even for extended periods of time
- Six antenna connectors allow customers to use a variety of antennas for multiple bands
- Connect to an Icom radio and all settings are automatically completed
- A LAN port for remote control operation from a PC
- 2×6 antenna selector allows SO2R (single operator two radios) operation with only one amplifier
- Super low-distortion output with superior IMD (Intermodulation Distortion)
- Simultaneous and data output for both Main and Sub bands
- Touch screen color TFT LCD enables intuitive setting changes
-
F7010S
F7010S
Icom F7010 Features
- 1024 Channels, 128 Zones
- 9 Programmable Keys
- Waterproof (IP68)
- Color Display
- P25 Trunking Capable (optional)
- Analog or Digital Mode
- Extra Loud Audio – 1,000mW
- Full Keypad Version
- Built-in Voice Scrambler, Optional FIPS or AES/DES Encryption
- Built-in Bluetooth
- Voice Recording
Reviews
There are no reviews yet.