Eclipse2

Eclipse2: Modes of operation

Migrate from analog to digital at
your own pace with this agile base
station + repeater:

Analog Base
Analog Repeater
Analog Voting over IP
Analog Multi-site over IP
P25 Repeater
P25 Voting over IP
P25 Multi-site over IP
P25 Base station

Category: iCOM Radios

Description
IC-M94D Specifications
Reviews (0)

P25 Digital +Analog Base Station/Repeater
Powerful & Proven Off the Shelf Performance

Broadband coverage, 256 channels
Get full VHF (136 - 174 MHz) and UHF (400 -
520 MHz) coverage along with plenty of
channels, each identifiable by own name,
TX/RX frequency, and profile

No in-field tuning or aligning:
IP Remote upgrade path
The TX and RX module is pre-tuned for the
whole frequency range, and level adjustment of the signal path is done via software.
Local or remote, optimize without having to
physically go to the site

P25 /Analog Voting over IP
An industry first! No extra controllers
required makes for easy configuration

Analog/digital auto sense
Migrate into digital as your agency’s
capabilities and budget allows

Create your own signal maps
Get full VHF coverage (136 - 174 MHz)
without tuning or aligning

More features
• Remote diagnostics over Ethernet
• Radio over IP (VoIP)
• InBase voting over IP
• (No Central Comparator required)
• TIA APCO P25 AFSI/DFSI compliant
• Snmp and syslog functionality
• P25 advanced conventional
• Software upgradeable
• Analog and P25 auto detect
• Field proven robust hardware
• Full duplex base station or repeater
• Software upgradeable to P25
• dPMR/DMR software ready
• Local voice reporting
• Individual channel profiles
• In base voting over IP network
• Smart signal & noise detection
• Self calibration in real time
• External reference input for
simulcast/paging
• Remotely configurable via IP
• Front panel mounted USB
programming socket
• Flash firmware upgrade capable
• Remote IP firmware rollback
safeguard facility
• Remote alarm logging using
RFC 3164 protocol
• Broadband high efficiency LDMOS
PA module
• RX & TX switching BW covers full
sub band
• Cross band capabilities
• Low RFI and EMI emission design
• Low current consumption with full
operating system
• Latest technology, full SMD
• Advanced and optimized RF design
• Fast & simple disassembly for service
• Minimal technician adjustments for
future maintenance
• Built on proven technology
• Virtual elimination of internal wiring
• 100% Duty cycle

General

Frequency range	Tx	156.025–157.425 MHz
	Rx	156.050–163.275 MHz
	Rx (CH70)	156.525 MHz
	RX (AIS)	162.025 MHz
Usable channel groups		INT, USA, CAN, WX channels
Type of emission		16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain (at 7.2 V DC)	TX (6 W/1 W output)	1500 mA/700 mA (approx.)
Current drain (at 7.2 V DC)	RX (Inter SP/Exter SP Max. audio)	700 mA/350 mA (approx.)
Operating temperature range		–20°C to +60°C; –4˚F to +140˚F
Antenna impedance		50 Ω
Dimensions (W×H×D) (Projections not included)		60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in
Weight (approximately)		357 g ; 12.6 oz (With BP-306, antenna, MB-133)

Transmitter

Output power (Hi/Low)		6 W/1 W
Max. frequency deviation		±5 kHz
Frequency stability		±10 ppm
Spurious emissions		–68 dBc typical

Receiver

Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER)		0.25 μV typical –3 dBμ emf typical –107 dBm
Squelch sensitivity (Threshold)		0.25 μV typical
Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 73 dBμ emf 50 dB typical
Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 73 dBμ emf 50 dB typical
Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 68 dBμ emf 50 dB typical
Hum and noise		40 dB
Audio output power (at 10% distortion)	Internal SP	1500 mW typical (8 Ω load)
Audio output power (at 10% distortion)	External SP	350 mW typical (8 Ω load)

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard	MIL-810 G
Standard	Method	Procedure
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Rain Blowing/Drip	506.5	I, III
Humidity	507.5	II
Salt Fog	509.5	–
Dust Blowing	510.5	I
Immersion	512.5	I
Vibration	514.6	I
Shock	516.6	I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water	IPX7 (Waterproof protection)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

BP-306 battery pack
BC-251 battery charger
AC adapter*
CP-26 cigarette lighter cable
MB-133 belt clip
Antenna
Hand strap

* May differ depending on version

Reviews

There are no reviews yet.

Be the first to review “Eclipse2”

Eclipse2

Eclipse2: Modes of operation