110W Mobile Kit

“IDAS™ HPUK” High Powered Mobile VHF or UHF Upgrade Kit

IDAS™ HPUK Specifications
Frequency range (VHF version): 136 –174MHz
Frequency range (UHF version): 450 – 470MHz
Number of channels: 256 channels/ 32 zones
Channel spacing: 12.5kHz
PLL channel step: 2.5kHz
Antenna impedance: 50 Ω
Operating temp. range: –10°C to +50°C; +14°F to +122°F
Total supply current: 30A @ 13.8V, 110W
Operating voltage: 13.8 VDC. ± 10%
Duty cycle: 30% (per EIA/TIA-603C)
Cooling: Forced air (2 thermostatically controlled cooling fans)

Operating humidity: 0% to 85% RH (Non-condensing)
Storage humidity: 0% to 95% RH (Non-condensing)
Fusing:
Main power cable 50 A
Fans 2 A
Radio 20 A
Amplifier 25 A
Dimensions: 14.25” (L) x 9.0” (W) x 5.4” (H)

Transmitter
Max. frequency deviation: ±5.0/2.5kHz (Wide/Narrow)
Frequency error: 1.0ppm
Adjacent channel power: 70/60dB min. (Wide/Narrow)
Digital FSK Error: 5% maximum
Audio harmonic distortion: 3% typ. (40% deviation)
Modulation limiting: 70–100% of Max. deviation
Load mismatch capability: 3:1 (No oscillation or damage)
5:1 (No damage)

Receiver
Sensitivity: 0.25μV typical (12dB SINAD)
Squelch sensitivity: 0.25μV typical
Adjacent channel selectivity: 80/75dB typ (Wide/Narrow)
Spurious response: 90dB typical
Intermodulation: 77/75dB typical (Wide/Narrow)
Hum & noise ratio: 50/45dB typical (Wide/Narrow)
Audio output power: 4W typical
External audio (D-sub): 22W typical (at 10% distortion w/ 4Ω load)
External speaker connector: 2-conductor 3.5 (d) mm (1⁄ 8”)/4Ω

Options
Separation Cable: -OPC608: 8m/26.2ft.
-OPC726: 5m/16.4ft.
-OPC607: 3m/9.8ft.
-OPC609: 1.9m/6.2ft.
External Speakers: -SP-22
-SP-30
-SP-35

All specifications are subject to change without notice or obligation.