Accessories
LEARN MOREAdapters
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Antennas
Showing 5–8 of 52 resultsSorted by latest
-
Dual Band Ducky Antenna for Rugged Handheld Radios
Dual Band Ducky Antenna for Rugged Handheld Radios
Features:
- Increase Range Up to 30%
- Dual Band (UHF / VHF) Antenna
- 15″ overall length.
- Easy Installation, simply screw antenna into the existing port
-
GO! Radio Antenna
-
Blackbox+ Antenna for VHF Radios
Blackbox+ Antenna for VHF Radios
Blackbox+ Antenna for VHF Radios
Replacement VHF antenna for Blackbox+ radios.
-
Blackbox+ Antenna for UHF Radios
Blackbox+ Antenna for UHF Radios
Blackbox+ Antenna for UHF Radios
Replacement UHF antenna for Blackbox+ radios.
Batteries
Showing 9–16 of 33 resultsSorted by latest
-
XPR7000 PMNN4493A Battery
XPR7000 PMNN4493A Battery
PMNN4493A Battery
This IMPRES 3000 mAh, the low-voltage battery provides 25+ hours of talk time when used with compatible MOTOTRBO Enhanced Series Radios. Data is stored in the battery and communicated to the charger via a unique IMPRES communication protocol, which is designed to maximize talk-time and optimize battery cycle life. This 3000 mAh, the low-voltage battery provides 25+ hours of talk time when used with compatible MOTOTRBO Enhanced Series Radios. The IP68 rating means it can be fully submersed at two meters for two hours.
-
XPR7000 PMNN4491 Impres Battery
XPR7000 PMNN4491 Impres Battery
PMNN4491 IMPRES™ 2 battery
The PMNN4491 IMPRES™ 2 battery, when used with an IMPRES™ charger, provides automatic, adaptive reconditioning, end-of-life display, and other advanced features. Data is stored in the battery and communicated to the charger via a unique IMPRES™ communication protocol which is designed to maximize talk-time and optimize battery cycle life. This 2100 mAh Li-Ion, high-density battery is IP68 rated, which means it can be fully submersed at two meters for 2 hours.
-
XPR7000 PMNN4489A Impres 2900 mAh Li-Ion Battery
XPR7000 PMNN4489A Impres 2900 mAh Li-Ion Battery
PMM4489A IMPRES 2900 mAh Li-Ion Battery
The IMPRES 2900 mAh Li-Ion battery offers extended talk time with trusted IMPRES technology. It is a low voltage, IP68 (TIA) battery that will provide more than 25 hours of talk time when used with an XPR 7000e radio.
-
XPR7000 PMNN4488A Battery
XPR7000 PMNN4488A Battery
PMNN4488A Battery
This battery is designed for the Silent Alert Belt Clip (PMLN7296) and is ideal for loud environments where you otherwise would miss incoming communication. The IP68 rating means it can be fully submerged at one meter for 30 minutes.
When used with an IMPRES charger, it provides automatic, adaptive reconditioning, end-of-life display, and other advanced features. Data is stored in the battery and communicated to the charger via a unique IMPRES communication protocol, which is designed to maximize talk-time and optimize battery cycle life. This 3000 mAh, the low-voltage battery provides 25+ hours of talk time when used with compatible MOTOTRBO Enhanced Series Radios. Designed for the Silent Alert Belt Clip (PMLN7296), it is ideal for loud environments where you otherwise would miss incoming communication. The IP68 rating means it can be fully submerged at one meter for 30 minutes.
-
XPR7000 PMNN4448AR Battery
XPR7000 PMNN4448AR Battery
PMNN4448AR Battery
This Motorola Original® long-life, cold temperature lithium battery has up to 1000 full charge/discharge cycles and is rated to withstand extreme temperatures down to -30 degrees C. Maintenance-free and lightweight, this battery does not require reconditioning or hazardous waste disposal.
-
XPR7000 PMNN4424AR Battery
XPR7000 PMNN4424AR Battery
PMNN4424AR Battery
This IMPRES 2350 mAh Li-Ion battery is IP67-rated, which means it can be fully submerged at one meter for 30 minutes. When used with an IMPRES charger, provide automatic, adaptive reconditioning, end-of-life display, and other advanced features. Data is stored in the battery and communicated to the charger via a unique IMPRES communication protocol, which is designed to maximize talk-time and optimize battery cycle life. This 2300 mAh Li-Ion battery is IP67-rated, which means it can be fully submerged at one meter for 30 minutes.
-
XPR7000 PMNN4412 Battery
XPR7000 PMNN4412 Battery
PMNN4412 Battery
This IMPRES™ NIMH 1400MAH battery is ruggedly designed, proven tough, has reliable performance, high durability, and tested with MOTOTRBO radios to ensure optimum performance.
-
XPR7000 PMNN4407 Battery
XPR7000 PMNN4407 Battery
PMNN4407 – IMPRES™ LI-ION 1600MAH BATTERY
Adaptive Reconditioning, End-of-Life Display, and Other Advanced Features
IMPRES batteries when used with an IMPRES charger provide automatic, adaptive reconditioning, end-of-life display, and other advanced features. Data is stored in the battery and communicated to the charger via a unique IMPRES communication protocol which is designed to maximize talk-time and optimize battery cycle life — all automatically. Automated maintenance and a six-month extended capacity warranty when used with IMPRES chargers. The PMNN4407 is a 1600mAh IMPRES battery.
Belt Clips
Showing 11–20 of 20 resultsSorted by latest
-
PMLN7296A
PMLN7296A
PMLN7296A Vibrating Alert Belt Clip
This belt clip vibrates to notify you of incoming calls, making it ideal for noisy environments where you are likely to miss call alerts. It is also beneficial in quiet environments because it allows you to quickly respond while not disturbing others with the sound of incoming notifications. Requires the PMNN4488 battery.
-
PMLN7008A
PMLN7008A
PMLN7008A 2.5-Inch Belt Clip
This rugged spring-action belt clip allows you to instantly access your radio. When paired with a remote speaker microphone or other audio accessories, you can securely keep the radio in the clip while communicating.
-
PMLN4651A
PMLN4651A
PMLN4651A 2-Inch Belt Clip
This two-inch, rugged, spring-action belt clip allows you to instantly access your radio. When it’s paired with a remote speaker microphone or other audio accessories, you can securely keep the radio in the clip while communicating.
-
MB-133
-
AAM18X501
-
AAH12X101
-
PMLN7128A
PMLN7128A
PMLN7128A Heavy-Duty Swivel Belt Clip
This heavy-duty belt clip allows you to secure the SL300 radio to your belt.
-
RLN5644A
RLN5644A
RLN5644A 2-Inch Belt Clip
This clip easily attaches to the back of the battery so the radio can be carried on the belt.
-
AAH12X101
-
HLN8255
HLN8255
HLN8255 3” Belt Clip
This rugged spring-action belt clip allows you to instantly access your radio. When paired with a remote speaker microphone or other audio accessory, you can securely keep the radio in the clip while communicating.
Cables & Connectors
Showing 11–20 of 51 resultsSorted by latest
-
XPR7000 PMLN6124A Impres 3-wire Surveillance Kit
XPR7000 PMLN6124A Impres 3-wire Surveillance Kit
PMLN6124A IMPRES 3-Wire Surveillance Kit with Beige Transducer Tube
Take surveillance operations to the next level with surveillance kits that allow you to transmit and receive discreet communications. These kits feature a streamlined design and durable, rugged cables that withstand tough working conditions. A quick-disconnect feature and a durable and comfortable translucent tube enable easy sharing of this kit between shifts. The three-wire surveillance kits feature one wire for receiving communication, one wire for the microphone, and one wire for the PTT. Motorola’s state-of-the-art IMPRES technology allows communication between the radio and the audio accessory. The result is optimal audio performance, enhanced audio gain capability, and increased customization, assuring the highest quality communication.
-
XPR7000 PMLN6123A 3 Wire Surveillance Kit IMPRES Black with Clear Acoustic Tube Earpiece
XPR7000 PMLN6123A 3 Wire Surveillance Kit IMPRES Black with Clear Acoustic Tube Earpiece
PMLN6123A 3 Wire Surveillance Kit, IMPRES, Black, Clear Acoustic Tube Earpiece, Programmable Button, direct radio connects
IMPRES(TM) enhanced audio, three separate wires for microphone – PTT/programmable button module – earpiece, direct radio connection, see below for complimentary recommendations. IMPRES(TM) technology allows the radio to read the response characteristics stored in the specific MSI audio accessory and configure its audio line up to provide the highest quality transmit and receive experience possible. Dedicated wires for a microphone, earpiece, and PTT/programmable button module enable the most discreet wearing with any clothes type. Easy to remove and replace the clear acoustic coiled tube (RLN6242) for hygiene purposes. Also available in beige (PMLN6124). For long-wear comfort, consider clear comfortable earpieces (RLN4764 or RLN4761).
-
XPR7000 PMLN5101A IMPRES Temple Transducer with Boom Microphone and Inline PTT
XPR7000 PMLN5101A IMPRES Temple Transducer with Boom Microphone and Inline PTT
PMLN5101 IMPRES Temple Transducer with Boom Microphone and Inline Push-to-Talk
This lightweight temple transducer with in-line push-to-talk and microphone provides clear audio as well as comfort for extended wear. Bone conduction enables you to receive audio without covering your ears, allowing you to either wear hearing protection in extreme-noise environments or keep your ears open to external sounds. This lightweight temple transducer with in-line push-to-talk and microphone provides clear audio as well as comfort for extended wear.
-
XPR7000 PMLN IMPRES Two-Wire Surveillance Kit Black
XPR7000 PMLN IMPRES Two-Wire Surveillance Kit Black
PMLN6129A IMPRES™ Two-Wire Surveillance Kit, Black
Designed with the earpiece located on one wire and the microphone and push-to-talk on the second wire. This black, 2-wire surveillance kit features a quick-disconnect, while a durable and comfortable translucent tube enables easy sharing of this kit between shifts. Two-wire kits feature one wire for receiving transmissions and one wire with a combined microphone and Push-To-Talk (PTT). Motorola’s state-of-the-art IMPRES technology allows communication between the radio and the audio accessory. The result is optimal audio performance, enhanced audio gain capability, and increased customization, assuring the highest quality communication. IMPRES technology provides clear communication across a number of environments, while the convenience of this two-wire surveillance kit is perfect for on-the-go users.
-
XPR7000 NNTN8459 1 Wire Surveillance Kit
XPR7000 NNTN8459 1 Wire Surveillance Kit
NNTN8459 1-WIRE SURVEILLANCE KIT
This single-wire surveillance kit has an inline microphone and Push-to-Talk (PTT). Surveillance accessories allow the user to discreetly send and receive messages. Ideal for private security, rental, retail, and hospitality applications.
-
XPR7000 NNTN8385 Wireless Neckloop Y Adapter and Rentention Hook
XPR7000 NNTN8385 Wireless Neckloop Y Adapter and Rentention Hook
NNTN8385 Wireless Neckloop Y-Adapter and Retention Hook
Motorola NNTN8385 y-adapter enables the Completely Discreet Wireless Surveillance Kit, a unique Bluetooth solution for the most covert situations. This adapter enables a wireless connection to your radio, giving you the flexibility to conceal your operations more effectively by removing the radio from your belt or under you clothing. For MOTOTRBO Operations Critical Wireless customers, this adapter must be ordered with the Completely Discreet Earpiece Kit (RLN4922) and the Operations Critical Wireless push-to-talk pod (NNTN8127). Compatible with Motorola APX 900, Motorola APX 3000 SERIES, Motorola APX 4000 SERIES, Motorola APX 6000 Series, Motorola APX 7000 Series, Motorola APX 8000 Series, Motorola SL 7550, Motorola XPR 3000 Series, Motorola XPR 6000 Series, Motorola XPR 7000 Series.
-
XPR7000 NNTN8295A 1-Wire Earbud with 116cm Cord – Black
XPR7000 NNTN8295A 1-Wire Earbud with 116cm Cord – Black
NNTN8295A1-Wire Earbud With 116cm Cord, Black
This wireless earbud has a simple, discreet design for business users wearing professional attire or for public safety users working undercover. This earbud has an inline microphone that is ideal for transmissions in discreet environments and comes with three sizes of ear tips for optimal comfort. The long cord gives you flexibility to clip the PTT on your belt or shirt pocket. This earbud must be connected to the appropriate push-to-talk pod. Police officers and other first responders wanting a secure solution with fast pairing will need to order the (NTN2571), while professional users wanting a cost-effective wireless solution to need to order (NNTN8127).
-
XPR7000 NNTN8295 Wireless Bluetooth Earbud with 45 inch cable
XPR7000 NNTN8295 Wireless Bluetooth Earbud with 45 inch cable
NNTN8295 Wireless Bluetooth Earbud with 45″ cable
This wireless earbud has a simple, discreet design for business users wearing professional attire or for public safety users working undercover. This earbud has an inline microphone that is ideal for transmissions in discreet environments and comes with 3 sizes of ear tips for optimal comfort. The long cord gives you flexibility in where you clip the PTT on your belt or shirt pocket.
This earbud must be connected to the appropriate push-to-talk pod. Police officers and other first responders wanting a secure solution with fast pairing will need to order the (NTN2571), while professional users wanting a cost-effective wireless solution need to order (NNTN8127). -
XPR7000 NNTN8127B Operations-Critical Wireless Push-to-Talk PTT Pod
XPR7000 NNTN8127B Operations-Critical Wireless Push-to-Talk PTT Pod
NNTN8127 Operations-Critical Wireless Push-to-Talk (PTT) Pod
The Operations-Critical Wireless Push-to-Talk (PTT) Pod offers a fast and flexible way to seamlessly connect to your radio. This wireless PTT is compact and lightweight, yet features a large, easy-to-access PTT button. Simply establish the Bluetooth® connection and put it in your pocket or clip it on your jacket, and you are ready to go. This device can operate as a stand-alone wireless PTT or can be ordered as part of the Completely Discreet Wireless Surveillance Kit or ordered to power the Operations-Critical Wireless Earbuds NNTN8294 or NNTN8296.
-
XPR7000 BDN6727A Receive-Only Surveillance Kit – Louder Version
XPR7000 BDN6727A Receive-Only Surveillance Kit – Louder Version
BDN6727A Receive-Only Surveillance Kit, Louder Version, Black
Receive-only surveillance kits allow you to receive private communication and are ideal for personnel who mostly listen to radio communication.
The louder version earphone in this surveillance kit is ideal for loud environments. This surveillance kit has a 3.5mm threaded connector and requires Remote Speaker Microphone with a secondary threaded jack or adapters: APX Series Radios BDN6783, XTS Series Radios BDN6676.
Carrying Solutions
Showing 11–20 of 54 resultsSorted by latest
-
PMLN5846 Leather Carry Case 3 inch Swivel Belt Loop
PMLN5846 Leather Carry Case 3 inch Swivel Belt Loop
PMLN5846 XPR7350 Leather Case 3-inch Swivel Belt Loop
These leather carry cases are made of top-grain leather, making them ideal for the most demanding jobs. When paired with audio accessories, carry cases allow you to keep your hands on your daily tasks. This 3-inch swivel model secures a belt loop, allowing the case to swing freely from side to side. The swivel latch system also allows the radio and case to be removed from the belt loop by simply inverting the case and lifting it up and out of the belt loop. Designed for the XPR 7350 non-display radio.
-
XPR7000 PMLN5845A Nylon Case with 3 inch fixed belt loop non display
XPR7000 PMLN5845A Nylon Case with 3 inch fixed belt loop non display
PMLN5845A Nylon Case With 3-Inch Fixed Belt Loop (Non-Display)
This nylon carry case features D rings to attach carry straps and a three-inch fixed belt loop. Designed for radios with no display.
Nylon carry cases are a cost-effective and lightweight solution—yet tough enough to withstand harsh environments. When paired with audio accessories, carry cases allow you to keep your hands on your daily tasks. This nylon carry case features D rings to attach carry straps and a three-inch fixed belt loop. Designed for radios with no display.
-
XPR7000 PMLN5844A Nylon cc 3 inch carry case
XPR7000 PMLN5844A Nylon cc 3 inch carry case
PMLN5844A NYLON CC 3INCH FIX LKP FKP
Carrying cases are available in sizes designed to fit your radio and battery and permit audio to be heard clearly. This nylon case with a 3-inch fixed belt loop is designed for the XPR 7550 display radio. Belt loop and nylon cases feature “D” rings that allow the cases to be attached to a carrying strap.
-
XPR7000 PMLN5843 Hard Leather Case Swivel Belt Loop
XPR7000 PMLN5843 Hard Leather Case Swivel Belt Loop
PMLN5843A Hard Leather Case With 2.5-Inch Fixed Belt loop
Carrying cases are available in sizes designed to fit your radio and battery and permit audio to be heard clearly. This hard leather case with 2.5-inch swivel belt loop is designed to work with the XPR 7350 non-display radio. Swivel model cases secure to a belt loop and allow the case to swing freely from side to side. The swivel latch system also allows the radio and case to be removed from the belt loop by simply inverting the case and lifting it up and out of the belt loop.
-
XPR7000 PMLN5839A Hard Leather Case
XPR7000 PMLN5839A Hard Leather Case
PMLN5839A Hard Leather Case With 3-Inch Fixed Belt loop
Designed to withstand harsh conditions, this leather carry case is made of top-grain leather, making it ideal for the most demanding jobs. When paired with audio accessories, carry cases allow you to keep your hands on your daily tasks. Designed for the XPR 7350 non-display radio.
-
XPR7000 PMLN5611A 3 inch Swivel Belt Loop
XPR7000 PMLN5611A 3 inch Swivel Belt Loop
PMLN5611A 3″ Swivel Belt Loop
The three-inch replacement leather swivel belt loop is compatible with all Motorola high-activity carry cases.
-
XPR7000 PMLN5610A Swivel Belt Loop
XPR7000 PMLN5610A Swivel Belt Loop
PMLN5610A 2.5″ Swivel Belt Loop
This replacement leather swivel latch system belt loop is designed for use with leather carry cases and allows the radio to swing freely from side to side and ensures that the radio remains securely in place during a foot chase.
-
XPR7000 HLN9985B Waterproof Baggie Weatherproof Baggie
XPR7000 HLN9985B Waterproof Baggie Weatherproof Baggie
HLN9985B Waterproof Baggie
This waterproof bag fits any Motorola two-way radio and includes a convenient carrying strap. This carrying accessory is ideal for radios that are exposed to excess water and are not submersible.
-
XPR7000 HLN6602A Universal Chest Pack
XPR7000 HLN6602A Universal Chest Pack
HLN6602 Universal Chest Pack
The Motorola Original® Universal Chest Pack protects and stores the radio with a Velcro-secured pouch that provides a convenient place during standby communication mode. It fits virtually any radio and in addition to the Velcro-secured pouch has a pen holder.
-
XPR7000 32012144001 32012144002 32012144003 32012144004 32012144005 Antenna Accessory Bands
XPR7000 32012144001 32012144002 32012144003 32012144004 32012144005 Antenna Accessory Bands
Antenna ID Bands (32012144001 – Gray, 32012144002 – Yellow, 32012144003 – Green, 32012144004 – Blue, 32012144005-Purple)
Antennas enhance your coverage and optimize your communication. These various color antenna bands provide identification for your two-way radios.
Chargers
Showing 11–20 of 33 resultsSorted by latest
-
FuelPad12® 12-Unit Battery Charger
FuelPad12® 12-Unit Battery Charger
FuelPad12® 12-Unit Battery Charger Features:
- Radio & Battery Charger Desktop Organizer Station.
- No need to purchase pods.
- Mix various radios on one charger.
- Charge radios with other electronics.
- Gross weight only 3.9 pounds (1.8 kilograms).
- FuelPad-12™ Simplicity: 1 outlet cable. 12 positions. Low cost.
-
12-GUAGE MULTI UNIT RAPID CHARGER
12-GUAGE MULTI UNIT RAPID CHARGER
12-GUAGE MULTI-UNIT RAPID CHARGER FEATURES:
Easy-Swap™ Interchangeable Pods. Available for All Popular Radio & Battery Models.
- Rapid Charger.
- UL Listed for Safety. Single Plug for Convenience.
- Includes your choice of 12 Pods.
- Power supply and charger cord included.
- Works with Blackbox radios.
-
Zone™ Desktop Charger
-
6-SHOT-SLIM Multi-Unit Battery Charger for all popular radios
6-SHOT-SLIM Multi-Unit Battery Charger for all popular radios
6-SHOT-SLIM Multi-Unit Battery Charger for all popular radios
- Easy-Swap™ Interchangeable battery pods.
- Rapid Charger.
- Charges Nicad, NiMH, Li-ion and Li-Poly batteries.
- Heavy duty durable design of polycarbonate plastic.
- 15V 900mA charge power per station.
- Agency approvals: UL, CE, CUL.
- Charge just the battery, or with the radio attached.
- Includes your choice of 6 Pods.
-
Blackbox Bantam® Desktop Charger
Blackbox Bantam® Desktop Charger
Blackbox Bantam® Desktop Charger
Rapid Rate Single Desktop Charger.
-
XPR7000 RLN6562 Operations Critical Bluetooth RSM
XPR7000 RLN6562 Operations Critical Bluetooth RSM
RLN6562 Wireless RSM w/Dual Unit Charger
Be ready in seconds without having to worry about wires getting in the way. The wireless Remote Speaker Microphone (PMMN4096) features enhanced simple pairing and fast PTT capabilities. It also features large, recessed push-to-talk and emergency buttons to ensure that users have easy access to controls, but don’t have to worry about accidental activation. Additional features include volume control, a 3.5mm audio jack, a task light, and a rotatable clip with D-ring (NNTN4990). A removable battery (PMNN4461) enables multi-shift usage. The compatible dual-unit desk charger (PMLN7120) can charge the RSM and a spare battery simultaneously.
-
XPR7000 PMPN4284A IMPRES TM 2 Multi Unit Desktop Charger
XPR7000 PMPN4284A IMPRES TM 2 Multi Unit Desktop Charger
PMPN4284A IMPRES(TM) 2 Multi-Unit IMPRES
Simultaneously charges up to 6 batteries or devices with IMPRES(TM) extended service life algorithms. Includes one display to view battery information. Built-in USB interface for charger firmware upgrades and connectivity to Fleet Management application. See below for compatible solutions and field service items
-
XPR7000 PMPN4174A IMPRES Single Unit Charger
XPR7000 PMPN4174A IMPRES Single Unit Charger
PMPN4174A IMPRES Single-Unit Charger
The Motorola PMPN4174A IMPRES single-unit Charger (SUC) is an innovative charging and reconditioning system that streamlines and automates battery maintenance. Talk time and life cycle are optimized as the need for manual maintenance programs is eliminated. Advanced conditioning features allow batteries to be left on the charger for extended periods of time without incurring heat damage. In addition, batteries left in the charger are kept fully charged so they are always ready when you need them.
Mix and match any MOTOTRBO IMPRES or non-IMPRES radio battery (except SL 7550 battery) in these chargers.
-
XPR7000 NNTN8275 Single-Unit Charger
XPR7000 NNTN8275 Single-Unit Charger
NNTN8275 Single-Unit Charger
Rapid rate standard charger for non-IMPRES MOTOTRBO batteries. Note that if IMPRES batteries are charged in a non-IMPRES charger, an additional six-month warranty is voided. This rapid charger kit charges your radios in two hours. Includes US power supply.
-
XPR7000 IMPRES 2 Multi Unit Desktop Charger
XPR7000 IMPRES 2 Multi Unit Desktop Charger
PMPN4284A IMPRES(TM) 2 Multi-Unit IMPRES
Simultaneously charges up to 6 batteries or devices with IMPRES(TM) extended service life algorithms. Includes one display to view battery information. Built-in USB interface for charger firmware upgrades and connectivity to Fleet Management application. See below for compatible solutions and field service items.
Earpieces
Showing 11–20 of 219 resultsSorted by latest
-
Intrepid 1-Wire Earpiece with Braided Cable
Intrepid 1-Wire Earpiece with Braided Cable
Intrepid 1-Wire Earpiece with Braided Cable Features:
- Braided cable.
- Right ear only.
- 3 sizes of silicone Eartips included.
- Coil is NOT a tube! This allows for better audio clarity and volume.
- Kevlar reinforced.
- Retail packed.
- Fits all Blackbox Models
-
Curl 1-Wire Earpiece Kit with Braided Cable
Curl 1-Wire Earpiece Kit with Braided Cable
Curl 1-Wire Earpiece Kit with Braided Cable Features:
The Power of comfort.
- Braided cables.
- Kevlar reinforced.
- C-Ring Earloop.
- Popular design for frontline and shift workers, with an earpiece that can be cleaned and shared.
- Swivels for Left or Right Ear.
- Speaker rests on ear for all-day comfort.
- In-line Microphone with PTT.
- 3-year replacement warranty.
- Fits all Blackbox Models
-
Star Single-Wire Earpiece with Braided Cable
Star Single-Wire Earpiece with Braided Cable
Star Single-Wire Earpiece with Braided Cable Features:
Clear Quick-Disconnect Audio Tube and clothing clip. Black tube optional.
- Braided cables.
- Kevlar reinforced.
- Snag & CUT FREE.
- In-line PTT button & microphone.
- Adjustable for left or right ear usage.
- Eartips included.
- 3-year replacement warranty.
- Fits all Blackbox Models
-
AGENT C-Ring Single Wire Earpiece with Braided Cable
AGENT C-Ring Single Wire Earpiece with Braided Cable
AGENT C-Ring Single Wire Earpiece with Braided Cable Features:
Single-Wire Earpiece with sturdy “C” swivel earloop with a clear-audio speaker that rests on the ear.
- Braided Cable.
- In-line PTT button & microphone
- Great for shift workers needing to share earpieces
- Left or right ear usage
- Fits all Blackbox Models
-
VAPOR – Single-Wire Earpiece Kit
VAPOR – Single-Wire Earpiece Kit
VAPOR – Single-Wire Earpiece Kit Features:
Single-Wire Earpiece with comfortable earbud speaker.
- In-line PTT button & microphone.
- Extra strong cabling and strain relief.
- Clothing Clip.
- Left or right ear usage.
- Fits all Blackbox Models
-
STAR 1-Wire Earpiece
STAR 1-Wire Earpiece
STAR 1-Wire Earpiece Features:
Clear Quick-Disconnect Audio Tube and clothing clip. Black tube optional.
If ordering the Star Quick-Disconnect (Star-QD) earpiece a Quick-Disconnect adapter is required – sold separately (shown on the left).
- In-line PTT button & microphone
- Adjustable for left or right ear usage
- Eartips included
- Fits all Blackbox Models
-
Agent C-Ring Single-Wire Earpiece Kit
Agent C-Ring Single-Wire Earpiece Kit
Agent C-Ring Single-Wire Earpiece Kit Features:
Single-Wire Earpiece with sturdy “C” swivel Earloop with the clear-audio speaker that rests on the ear.
- In-line PTT button & microphone
- Great for shift workers needing to share earpieces
- Left or right ear usage
- Fits all Blackbox Models
-
Agent D-Ring Single-Wire Earpiece Kit
Agent D-Ring Single-Wire Earpiece Kit
Agent D-Ring Single-Wire Earpiece Kit Features:
Single-Wire Earpiece with sturdy D-ring Earloop and clear-audio speaker that rests on the ear.
- In-line PTT button & microphone
- Great for shift workers needing to share earpieces
- Left or right ear usage
- Fits all Blackbox Models
-
CURL 1-Wire Earpiece Kit
CURL 1-Wire Earpiece Kit
CURL 1-Wire Earpiece Kit Features
The Power of comfort.
- C-Ring Earloop.
- A popular design for frontline and shift workers, with an earpiece that can be cleaned and shared.
- Swivels for Left or Right Ear.
- Speaker rests on ear for all-day comfort.
- In-line Microphone with PTT.
- Fits all Blackbox Models
-
SL1WW White Earpiece
SL1WW White Earpiece
SL1WW 1 Wire White SnapLock PTT/Mic.
- One wire to microphone PTT and then to the earpiece
- Industry Leading 30lbs of pull strength at cable to PTT connections
- Specialized cable for flexibility in various temperature environments
- Enhanced RF Shielded Microphone
- Molded stress relief at connector
- Multiple earpiece options available – Sold Separately
- Connectors to support multiple radio models
Handsets
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Headsets
Showing 11–20 of 84 resultsSorted by latest
-
Commander – Tactical Headset
Commander – Tactical Headset
Commander – Tactical Headset Features:
Extreme heavy-duty headset with noise-canceling flexible boom microphone.
- In-line PTT button options.
- Behind-the-head design with adjustable rubber sizing bar.
- Tygon clear acoustic audio tube for extreme noise conditions.
- Weather-resistant.
- Speaker has encased in weather-resistant housing on the back of the headband.
- Adjustable rubber sizing bar attached to the coated steel headband.
- For SWAT, Police, Rescue, Security.
- Various cable lengths, materials, diameters and PTT button styles are available.
-
XPR7000 RMN5139B Headset 3M Peltor, 21DB
XPR7000 RMN5139B Headset 3M Peltor, 21DB
RMN5139B MT Series Hard Hat Attached Headset with Direct Radio
Designed for industrial users working in high noise, this MT Series headset incorporates 3M Peltor™ technology for hearing protection. This hard hat style headset connects directly to your radio and features dual-ear speakers, a noise-canceling boom microphone, and an easily accessible push-to-talk button located on the ear cup. It has a noise reduction rating of 25 dB and features a noise-canceling boom microphone for enhanced audio transmission. The new B revision headsets are TIA4950 Intrinsically Safe certified when used with Motorola TIA4950 certified radios.
-
XPR7000 RMN5138 Neckband Headset
XPR7000 RMN5138 Neckband Headset
RMN5138 Neckband Headset
These neckband style headsets are direct radio connect and incorporate 3M Peltor technology in both earcup design and electronics to offer head protection, durability, and comfort. This versatile headset connects directly to your radio and features dual-ear speakers, a noise-canceling boom microphone, and an on-ear cup push-to-talk. They are for Industrial Users working in high noise environments. The headset has a noise-canceling boom microphone and has a noise reduction rating of 24 lb.
-
XPR7000 RMN5135A TacticalPro Series Neckband Headset
XPR7000 RMN5135A TacticalPro Series Neckband Headset
RMN5135A 3M Peltor Tactical Pro Series Neckband Headset
When ambient sound and face-to-face voice recognition are required in your noisy environment, rely on the 3M™ Peltor™ Tactical Pro Headset. This headset is designed with a frequency response that amplifies signals, voices, and warning sirens, while at the same time suppressing potentially dangerous impulse noises. The noise-canceling boom microphone operates with 2 AA batteries. Push-to-talk (PTT) radio adaptor sold separately. Noise reduction rating (NRR): 25 dB
-
XPR7000 RMN5133A Receive Only Hard Hat Mount Headset
XPR7000 RMN5133A Receive Only Hard Hat Mount Headset
RMN5133A 3M Peltor HT Series Receive-Only Hard Hat Mount Headset
With its carefully designed speaker system and excellent attenuation, the HT™ Series Receive-Only Headset offers clear communication in high-noise environments.
This hard hat headset features dual-ear speakers and a 3.5mm connector designed for use with remote speaker microphones. With its noise reduction rating (NRR) of 23 dB, you can rest assured that your hearing is protected.
-
XPR7000 RMN5132A Receive-Only Neckband Headset
XPR7000 RMN5132A Receive-Only Neckband Headset
RMN5132A 3M Peltor Receive-Only Neckband Headset
With its carefully designed speaker system and excellent attenuation, the HT™ Series Receive-Only Headset offers clear communication in high-noise environments. This neckband-style headset features dual-ear speakers and a 3.5mm connector designed for use with remote speaker microphones. With a noise reduction rating (NRR) of 24 dB, you can rest assured that your hearing is protected.
-
XPR7000 RMN5058 Lightweight Headset
XPR7000 RMN5058 Lightweight Headset
RMN5058 – Lightweight Headset
This lightweight headset provides high-clarity, hands-free, discreet two-way, communication while maintaining the comfort necessary for extended-wear in moderate noise environments. Adjustable over-the-head, single-ear headset with a boom microphone and in-line PTT.
-
XPR7000 RMN4057B Receive Only Hard Hat Mount Headset
XPR7000 RMN4057B Receive Only Hard Hat Mount Headset
RMN4057B Receive-Only Hard Hat Mount Headset
With its carefully designed speaker system and excellent attenuation, this HT™ Series Receive-Only Headset offers clear communication in high-noise environments. This hard hat style headset features dual-ear speakers and a 3.5mm threaded connector designed for use with radio adapter BDN6676. With a noise reduction rating (NRR) of 23 dB, you can rest assured that your hearing is protected
-
XPR7000 RMN4056B Receive-Only Over-the-Head Headset
XPR7000 RMN4056B Receive-Only Over-the-Head Headset
RMN4056B Receive-Only Over-the-Head Headset
Listen-only over-the-head style headset has a right angle threaded 3.5mm connector. This receive-only, dual-muff headband-style headset provides 25 dB of noise reduction for use with a 3.5mm threaded jack.
-
XPR7000 RMN4055B Receive-Only Headband Headset
XPR7000 RMN4055B Receive-Only Headband Headset
RMN4055B Receive-Only Headband Headset
With its carefully designed speaker system and excellent attenuation, the HT™ Series Receive-Only Headset offers clear communication in high-noise environments. This headband style headset features dual-ear speakers and a 3.5mm right angle thread connector designed for use with remote-speaker microphones. With a noise reduction rating (NRR) of 25 dB, you can rest assured that your hearing is protected.
Head & Wrist Bands
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Speaker Mics
Showing 11–20 of 88 resultsSorted by latest
-
SM9WLNC Microphone
SM9WLNC Microphone
SM9WLNC Full Size, Heavy Duty Active Noise Cancelling Speaker Microphone
- Long Cable
- IP67 Rated Water & Dust Resistant up to 1 meter
- Dual Active Noise Cancelling
- Dual-Core DSP Chips with Noise Reduction Algorithms
- Wind Protection Dual MEMS Microphone
- Spark Guard Metal Spark Proof Speaker
- 4.9mm V-0 Rated Flame Retardant Cable
- 3.5mm Audio Port
- Heavy Duty Clip with Hanging Ring
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM9WELNC Microphone
SM9WELNC Microphone
SM9WELNC – Full Size, Heavy Duty IP67 water & dust proof, Active Noise Cancelling Speaker Mic., 3.5mm earpiece port, Emergency Button, Long Cable
- IP67 Rated Water & Dust Resistant up to 1 meter
- Duel Active Noise Cancelling
- Dual-Core DSP Chips with Noise Reduction Algorithms – PI-36 is a digital DSP long-distance pickup and noise reduction module. It can clearly extract human voices in a noisy environment and suppress environmental noise. The PI-36 module integrates a dual-core DSP chip with a unique and efficient noise reduction algorithm, which is effective for both steady-state and non-steady-state noise.
- Wind Protection Duel MEMS Microphone – MEMS microphones have an amplifier unit inside and generally have 3 wires: ground, power and audio output. Compared with condenser microphones, MEMS microphones can obtain very stable signals with high signal-to-noise ratio and good consistency.
- Spark Guard Metal Spark Proof Speaker – protection from hot metal shavings
- 4.9 mm V-O Rated Flame Retardant Cable – Burning stops within 10 seconds on a vertical part allowing for drops of plastic that are not inflames
- 3.5mm Audio Port
- Heavy Duty Clip with Hanging Ring
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM8WENC Microphone
SM8WENC Microphone
SM8WENC Full Size, Heavy Duty IP67, Active Noise Cancelling Speaker Mic.
- Large / Dual / Grey Front PTT and Side PTT
- NEXUS Jack
- Variable Volume
- Tested MIL-STD810G
- IP67 Rated Water and Dust Proof
- Flame Retardant
- Active Noise Cancellation
- Dual-Core DSP Chips with Noise Reduction Algorithms
- Nexus 5 Pole Jack for Headset
- 3.5mm Accessory Port
- Toggle Volume Control Switch
- LED
- Emergency Button
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM8GWENC Microphone
SM8GWENC Microphone
SM8GWENC Full Size, Heavy Duty IP67, Active Noise Cancelling Speaker Microphone
- Green / Dual PTT
- Emergency Button
- LED – High Visibility Green
- Variable Volume
- NEXUS Jack
- Tested MIL-STD810G
- IP67 Rated Water and Dust Proof
- Flame Retardant
- Active Noise Cancellation
- Dual-Core DSP Chips with Noise Reduction Algorithms
- Nexus 5 Pole Jack for Headset
- 3.5mm Accessory Port
- Large Front PTT & Side PTT
- Toggle Volume Control Switch
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM7 Standard Microphone
SM7 Standard Microphone
SM7 Standard Size Heavy Duty Microphone with Rechargeable Battery
- Compact Heavy-Duty Design
- IP55 Water and Dust Resistant
- 3.5mm Accessory Port on the Side
- Power On/Off Button
- Battery Powered – Common Replacement Battery
- 3.5mm earpiece port on the side
- Power On/Off Button
- Accessory Jack for Listen Only
- Heavy Gauge 4.2mm Coiled Cable
- Volume Control
- Led Indicator – Low Power and Charging Indicator
- 360 Degree Rotating Clothing Clip
- USB to Micro USB Charging Cable Included
- Torch LED on Front with on/Off Button
- Features a Heat-Resistant and Strong Synthetic Fiber Kevlar Cord
- Dimensions: 2.3” x 1.1” x 3”
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM6WLNC Microphone
SM6WLNC Microphone
SM6WLNC Compact Size, Heavy Duty IP67 Noise Cancelling Speaker Microphone
- Compact Heavy-Duty Design
- Extra Long Heavy-Duty Fire Retardant Strong Synthetic Fiber Kevlar 4.2mm Coiled Cable
- Dual Active Noise Cancelling
- Dual-Core DSP Chips with Noise Reduction Algorithms
- Performs well in High Noise Areas
- Spark Guard Metal Spark Proof Fire Retardant Speaker
- IP67 Rated Water & Dust Resistant up to 1 meter
- 3.5mm earpiece Audio Port for Listen Only Earpiece
- Strong 360-degree Rotating Clip
- Dimensions 2.25” x 8” x 2”
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM6WE Microphone
SM6WE Microphone
SM6WE Heavy Duty Speaker Mic with Emergency Button
- Compact Heavy-Duty Design
- Heavy-Duty, Fire Retardant 4.9mm Coiled Cable
- IP Rated Water & Dust Proof up to 1 meter
- Red Emergency Button on Top
- Features an Unstretched 457mm – 18 in Cable Length
- 3.5mm Audio Port for most Radio Models (HR3 and HR2 have 2.5mm Audio Port)
- Dimensions: 2.5” x .8” x 2”
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM6W Microphone
SM6W Microphone
SM6W Compact Size Heavy Duty Speaker Mic
- IP67 Water and Dust Proof
- Compact Heavy-Duty Design
- Water and Dust Resistant up to 1 meter
- Heavy-Duty Fire Retardant 4.9mm Coiled Cable
- Features an Unstretched 406.4 mm. – 16 in. Cable Length
- Optional Emergency Button for support radio models
- 3.5mm Audio Port on the Side for most Radio Models (HR3 and HR2 have 2.5mm Audio Port
- Dimensions: 2.5” x .8” x 2”
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM6 Compact Size Heavy-Duty Speaker Microphone
SM6 Compact Size Heavy-Duty Speaker Microphone
SM6 Compact Size Heavy-Duty Speaker Microphone
- Extra Long Heavy-Duty Gauge Kevlar 4.3mm Coiled Cable
- IP55 Rated Water & Dust Resistant
- Features an Extra Long Unstretched 610mm. – 24 in. Cable Length
- 360 Degree Rotating Clothing Clip
- Optional Emergency Button for Supported Radio Models
- 3.5mm Audio Port
- Dimensions: 2.5″ x .8″ x 2″
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
-
SM4W Microphone
SM4W Microphone
SM4W Full-Size Heavy-Duty Speaker Microphone
- IP67 Rated Water and Dust Proof – Resistant up to 1 meter
- Specialized cable for flexibility in various temperatures
- Molded stress relief at connector and microphone
- 360-degree Rotating Clip
There are various connection configurations depending on your radio brand and model. Please see the list below to find your correct connector.
We're Here To Help!
Office
Kennewick, WA 99336
Hours
Mon – Fri: 8:00AM-5:00PM
Sat – Sun: Closed