Vertex Standard
LEARN MOREHand Held Radios
Showing 214–216 of 939 results
-
IC-7600
IC-7600
IC-7600 Features
[Antenna connectors]
- Two Tx/Rx antenna connectors with automatic antenna selector
- Rx antenna In/Out connector for receiver antenna or external alttenuator
[Receiver]
- General coverage receiver covers from 30kHz to 60MHz
(* Some frequency bands are not guaranteed, depending on version) - Two types of receiver preamplifiers: Preamp 1: Increase low level signal improving intermodulation characteristics Pream 2: High gain preamplier
- Built-in 3-step RF attenuator (6,12 and 18dB)
[Transmitter]
- Tx monitor
- 50 CTCSS tone encoder and decoder
- All mode power control
- VOX capability (Voice operated transmission)
[CW mode]
- Multi-function electronic keyer with adjustable keying speed, dot-dash ratio and paddle polarity and bug key function
- DSP controlled CW keying waveform shaping
- Frequency lock function for split operation
- The normal (default) CW carrier point is selectable from USB and LSB
- APF (audio peak filter) function with soft/sharp filter shape
- Double key jack system
- Full break-in function and semi break-in function
- CW pitch control from 300 to 900Hz
- Adjustable CW envelope
[Operation]
- Set mode function for flexible and speedy setting
- Memory pad stores up to 10 (or 5) operating frequencies
- Quick split function enables split operation with a single action
- Digital meter indicates output power, ALC level, SWR, COMP (compression level), Id (drain current of the final amplifier) and VD (voltage of the final amplifer)
- Single knob control from squelch volume to RF gain
- RIT and ∂Tx variable up to ±9.999kHz
- Quick RIT/∂TX clear function
- UTC/Local Clock and timer function
- 1Hz pitch tuning and 1Hz indication
- 101 memory channels with 10-character comment
- Built-in voice synthesizer announces operating frequency, mode and receiving signal strength
- Programmed scan, memory scan, select memory scan, VSC scan and ∂F scan
- Auto tuning step function
- Band edge beep
- Main dial tension control and dial lock
- CI-V interface capability and RS-232C connector for PC connection
- AH-4 control circuit
- Triple band stacking register
- FFT scope wave averaging function
- Screen saver function
-
IC-7800
IC-7800
IC-7800 Features
All of the following CW capabilities are included in the IC-7800:
- DSP controlled CW keying waveform shaping
- Multi-function electronic keyer with adjustable keying speed from 6–60 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
- CW pitch control from 300 to 900Hz (5Hz pitch)
- CW-Reverse mode operation with selectable normal (default) carrier point
- Double key jack system (front and rear panel)
- Full break-in and semi-break-in functions
- CW/AM auto tuning function helps to zero in on intended signals within ±500Hz range
- 4 channels of memory keyer with 70 characters of transmit memory
- Bug keyer and microphone up/down keyer
-
IC-P7A
IC-P7A
IC-P7A Features
- Ultra compact, lightweight body—47×81×28 mm*, 160g**
* 127/32×33/16×13/32 in, projections are not included.
** 5.6oz, including BP-243 and antenna - 20 hours of operating time* or 15 hours of continuous TV/FM receive capability with slim Lithium-Ion battery pack
* Tx:Rx:Stand-by=5:5:90 with power save on - Wideband receiver (0.495—999.990MHz*) allows you to listen to FM, TV (audio) broadcasts and other service communications
* Receiver range differs depending on version - VHF/UHF dual bander with 1.5W/1.0W output power (One band at a time).
- Minimum number of buttons for simple operation
- CTCSS and DTCS tone for repeater access and quiet stand-by
- 1000 alphanumeric memory channels with flexible memory bank system
- Supplied rapid charger, BC-164, charges the battery pack in 3 hours (approx.)
- Ultra compact, lightweight body—47×81×28 mm*, 160g**
Speaker Mics
Showing 214–216 of 939 results
-
IC-7600
IC-7600
IC-7600 Features
[Antenna connectors]
- Two Tx/Rx antenna connectors with automatic antenna selector
- Rx antenna In/Out connector for receiver antenna or external alttenuator
[Receiver]
- General coverage receiver covers from 30kHz to 60MHz
(* Some frequency bands are not guaranteed, depending on version) - Two types of receiver preamplifiers: Preamp 1: Increase low level signal improving intermodulation characteristics Pream 2: High gain preamplier
- Built-in 3-step RF attenuator (6,12 and 18dB)
[Transmitter]
- Tx monitor
- 50 CTCSS tone encoder and decoder
- All mode power control
- VOX capability (Voice operated transmission)
[CW mode]
- Multi-function electronic keyer with adjustable keying speed, dot-dash ratio and paddle polarity and bug key function
- DSP controlled CW keying waveform shaping
- Frequency lock function for split operation
- The normal (default) CW carrier point is selectable from USB and LSB
- APF (audio peak filter) function with soft/sharp filter shape
- Double key jack system
- Full break-in function and semi break-in function
- CW pitch control from 300 to 900Hz
- Adjustable CW envelope
[Operation]
- Set mode function for flexible and speedy setting
- Memory pad stores up to 10 (or 5) operating frequencies
- Quick split function enables split operation with a single action
- Digital meter indicates output power, ALC level, SWR, COMP (compression level), Id (drain current of the final amplifier) and VD (voltage of the final amplifer)
- Single knob control from squelch volume to RF gain
- RIT and ∂Tx variable up to ±9.999kHz
- Quick RIT/∂TX clear function
- UTC/Local Clock and timer function
- 1Hz pitch tuning and 1Hz indication
- 101 memory channels with 10-character comment
- Built-in voice synthesizer announces operating frequency, mode and receiving signal strength
- Programmed scan, memory scan, select memory scan, VSC scan and ∂F scan
- Auto tuning step function
- Band edge beep
- Main dial tension control and dial lock
- CI-V interface capability and RS-232C connector for PC connection
- AH-4 control circuit
- Triple band stacking register
- FFT scope wave averaging function
- Screen saver function
-
IC-7800
IC-7800
IC-7800 Features
All of the following CW capabilities are included in the IC-7800:
- DSP controlled CW keying waveform shaping
- Multi-function electronic keyer with adjustable keying speed from 6–60 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
- CW pitch control from 300 to 900Hz (5Hz pitch)
- CW-Reverse mode operation with selectable normal (default) carrier point
- Double key jack system (front and rear panel)
- Full break-in and semi-break-in functions
- CW/AM auto tuning function helps to zero in on intended signals within ±500Hz range
- 4 channels of memory keyer with 70 characters of transmit memory
- Bug keyer and microphone up/down keyer
-
IC-P7A
IC-P7A
IC-P7A Features
- Ultra compact, lightweight body—47×81×28 mm*, 160g**
* 127/32×33/16×13/32 in, projections are not included.
** 5.6oz, including BP-243 and antenna - 20 hours of operating time* or 15 hours of continuous TV/FM receive capability with slim Lithium-Ion battery pack
* Tx:Rx:Stand-by=5:5:90 with power save on - Wideband receiver (0.495—999.990MHz*) allows you to listen to FM, TV (audio) broadcasts and other service communications
* Receiver range differs depending on version - VHF/UHF dual bander with 1.5W/1.0W output power (One band at a time).
- Minimum number of buttons for simple operation
- CTCSS and DTCS tone for repeater access and quiet stand-by
- 1000 alphanumeric memory channels with flexible memory bank system
- Supplied rapid charger, BC-164, charges the battery pack in 3 hours (approx.)
- Ultra compact, lightweight body—47×81×28 mm*, 160g**
Check out our accessories
We're Here To Help!
Office
100 North Morain Street, Suite 208
Kennewick, WA 99336
Kennewick, WA 99336
Hours
Mon – Fri: 8:00AM-5:00PM
Sat – Sun: Closed