SLR 8000

SLR 8000 Features

  • VHF (136-174 MHz) and UHF (400-470 MHz)
  • 64 Channels
  • RF Output Power DC (24 V) or AC 1-100W or DC (12 V) 1-50W
  • 100% Duty Cycle At Full Power
  • Input Power Modes: Ac Only, DC Only, AC with Battery Revert
  • Can Offer Continuous Full Transmit Power Of 100W
  • Integrated 5A Battery Charger
  • Interface For Battery Back-Up and Charge
  • Integrated Power Supply
  • Repeater Diagnostics and Control
  • Repeater Disabled
  • Field Replaceable Parts

Get to know more at:

  Mototrbo Feature Catalogue

SLR 8000 REPEATER

For better safety and efficiency throughout your organization, you need reliable voice and data communications that connect everyone and everything. The MOTOTRBO SLR 8000 Repeater delivers high performance, high reliability two-way radio service, optimized for your workplace. With its small outline and high reliability, it’s engineered for low cost of ownership. And with a huge leap forward in technology, it represents the next generation in repeaters.

Versatile and powerful, MOTOTRBO combines the best of two-way radio functionality with the latest digital technology. It integrates voice and data seamlessly, offers advanced features that are easy to use and delivers increased capacity to meet your communication needs from the field to the factory floor.

Whether you need the simplicity of a single site conventional system or the powerful trunking capabilities of Capacity Plus, Capacity Max or Connect Plus, the SLR 8000 delivers the power of digital two-way radio to your workforce.

General

Frequency range Tx 156.025–157.425 MHz
Rx 156.050–163.275 MHz
Rx (CH70) 156.525 MHz
RX (AIS) 162.025 MHz
Usable channel groups INT, USA, CAN, WX channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain
(at 7.2 V DC)
TX (6 W/1 W output) 1500 mA/700 mA (approx.)
RX (Inter SP/Exter SP Max. audio) 700 mA/350 mA (approx.)
Operating temperature range –20°C to +60°C; –4˚F to +140˚F
Antenna impedance 50 Ω
Dimensions (W×H×D)
(Projections not included)
60.9 × 145.8 × 43.8 mm;
2.4 × 5.7 × 1.7 in
Weight (approximately) 357 g ; 12.6 oz
(With BP-306, antenna, MB-133)

 

 

Transmitter

Output power (Hi/Low) 6 W/1 W
Max. frequency deviation ±5 kHz
Frequency stability ±10 ppm
Spurious emissions –68 dBc typical

 

 

Receiver

Sensitivity (at 12 dB SINAD)
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
0.25 μV typical
–3 dBμ emf typical
–107 dBm
Squelch sensitivity (Threshold) 0.25 μV typical
Adjacent channel selectivity
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Spurious response
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Intermodulation
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
68 dBμ emf
50 dB typical
Hum and noise 40 dB
Audio output power
(at 10% distortion)
Internal SP 1500 mW typical (8 Ω load)
External SP 350 mW typical (8 Ω load)

 

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

 

 

Applicable U.S. Military Specifications & IP Rating

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water IPX7 (Waterproof protection)

 

All stated specifications are subject to change without notice or obligation.

 

 

Supplied Accessories

  • BP-306 battery pack
  • BC-251 battery charger
  • AC adapter*
  • CP-26 cigarette lighter cable
  • MB-133 belt clip
  • Antenna
  • Hand strap

* May differ depending on version

Reviews

There are no reviews yet.

Be the first to review “SLR 8000”

Your email address will not be published. Required fields are marked *