SLR 1000

SLR 1000 Features

Protected For Your Environment

Protected For Your Environment
Improve your coverage in the way that works best for you. With an IP65 rating for water and dust protection along with a fanless design, you can deploy indoors or out without worry.

Cost-effective Coverage

Cost-effective Coverage
Increasing your coverage doesn’t have to mean increasing your cost of ownership. The SLR 1000 features a low power, fanless, space-saving design that reduces energy and potential installation costs.

Deply In More Places

Deploy In More Places
Easily mount the SLR 1000 on walls or poles, and take advantage of additional locations to improve coverage. And its compact, fanless design means fewer HVAC planning headaches—with more deployment options.

Growds With You

Grows With You
The SLR 1000 works with both conventional and trunking systems that support voice and data, so you can continue to use it as you expand your network. For conventional systems, deploy the SLR 1000 with Extended Range Direct Mode, and expand your range without having to purchase additional frequencies.

 

SLR 1000 REPEATER

Keeping your team connected requires uninterrupted radio coverage. Using the SLR 1000 repeater, you can easily extend the range of your network through dead zones and across remote locations, so everyone’s within reach. Deploy the SLR 1000 indoors or out—it’s IP65-rated for dust and water protection. The compact size gives you more installation options. And a low power, fanless design uses less space and energy.

General

Frequency range Tx 156.025–157.425 MHz
Rx 156.050–163.275 MHz
Rx (CH70) 156.525 MHz
RX (AIS) 162.025 MHz
Usable channel groups INT, USA, CAN, WX channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain
(at 7.2 V DC)
TX (6 W/1 W output) 1500 mA/700 mA (approx.)
RX (Inter SP/Exter SP Max. audio) 700 mA/350 mA (approx.)
Operating temperature range –20°C to +60°C; –4˚F to +140˚F
Antenna impedance 50 Ω
Dimensions (W×H×D)
(Projections not included)
60.9 × 145.8 × 43.8 mm;
2.4 × 5.7 × 1.7 in
Weight (approximately) 357 g ; 12.6 oz
(With BP-306, antenna, MB-133)

 

 

Transmitter

Output power (Hi/Low) 6 W/1 W
Max. frequency deviation ±5 kHz
Frequency stability ±10 ppm
Spurious emissions –68 dBc typical

 

 

Receiver

Sensitivity (at 12 dB SINAD)
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
0.25 μV typical
–3 dBμ emf typical
–107 dBm
Squelch sensitivity (Threshold) 0.25 μV typical
Adjacent channel selectivity
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Spurious response
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Intermodulation
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
68 dBμ emf
50 dB typical
Hum and noise 40 dB
Audio output power
(at 10% distortion)
Internal SP 1500 mW typical (8 Ω load)
External SP 350 mW typical (8 Ω load)

 

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

 

 

Applicable U.S. Military Specifications & IP Rating

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water IPX7 (Waterproof protection)

 

All stated specifications are subject to change without notice or obligation.

 

 

Supplied Accessories

  • BP-306 battery pack
  • BC-251 battery charger
  • AC adapter*
  • CP-26 cigarette lighter cable
  • MB-133 belt clip
  • Antenna
  • Hand strap

* May differ depending on version

Reviews

There are no reviews yet.

Be the first to review “SLR 1000”

Your email address will not be published. Required fields are marked *