PD482i

PD482i Features:

The PD482i is a cost-effective two-way radio with advanced features:

  • Functions in digital and analog modes in radio-to-radio calls, or with any Hytera repeater or base station
  • Rugged and ergonomic design with a full keypad, high contrast OLED screen, and programmable buttons
  • Built-in GPS and Bluetooth, emergency calls, and voice-activated communications (VOX)
  • Supports Tier II radio networks, pseudo trunking, and Radio Registration Service for connectivity to dispatch applications

PD482i - Conventional digital two-way radio with GPS and Bluetooth option

HANDHELD | DMR RADIOS AND REPEATERS

 

HYTERA PD482I DMR PORTABLE UHF 4-WATT RADIO

Robust and reliable, the new Hytera PD482i portable digital radio offers a simple communication solution. This Hytera DMR 4-Watt radio is ideal for users operating in manufacturing, facilities management or education environments that use security two way radios.

Features:

  • UHF 350-470MHz (standard antenna 400-470)
  • Channels 256
  • 4-Watt
  • AMBE++
  • 2000mAh Li-ion battery
  • Full keyboard

 

CONVENTIONAL DIGITAL TWO-WAY RADIO WITH GPS AND BLUETOOTH OPTION.

Standard Package:   
  • Radio
  • Standard UHF  Antenna
  • Li-ion Battery (2000mAh) BL2010
  • Switching Power Adapter PS1014 
  • MCU Single Unit Charger CH10A07 
  • Nylon Strap RO03 
  • Belt Clip BC08

General

Frequency range Tx 156.025–157.425 MHz
Rx 156.050–163.275 MHz
Rx (CH70) 156.525 MHz
RX (AIS) 162.025 MHz
Usable channel groups INT, USA, CAN, WX channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain
(at 7.2 V DC)
TX (6 W/1 W output) 1500 mA/700 mA (approx.)
RX (Inter SP/Exter SP Max. audio) 700 mA/350 mA (approx.)
Operating temperature range –20°C to +60°C; –4˚F to +140˚F
Antenna impedance 50 Ω
Dimensions (W×H×D)
(Projections not included)
60.9 × 145.8 × 43.8 mm;
2.4 × 5.7 × 1.7 in
Weight (approximately) 357 g ; 12.6 oz
(With BP-306, antenna, MB-133)

 

 

Transmitter

Output power (Hi/Low) 6 W/1 W
Max. frequency deviation ±5 kHz
Frequency stability ±10 ppm
Spurious emissions –68 dBc typical

 

 

Receiver

Sensitivity (at 12 dB SINAD)
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
0.25 μV typical
–3 dBμ emf typical
–107 dBm
Squelch sensitivity (Threshold) 0.25 μV typical
Adjacent channel selectivity
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Spurious response
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
73 dBμ emf
50 dB typical
Intermodulation
DSC receiver (at 1% BER)
AIS receiver (at 20% PER)
70 dB typical
68 dBμ emf
50 dB typical
Hum and noise 40 dB
Audio output power
(at 10% distortion)
Internal SP 1500 mW typical (8 Ω load)
External SP 350 mW typical (8 Ω load)

 

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

 

 

Applicable U.S. Military Specifications & IP Rating

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water IPX7 (Waterproof protection)

 

All stated specifications are subject to change without notice or obligation.

 

 

Supplied Accessories

  • BP-306 battery pack
  • BC-251 battery charger
  • AC adapter*
  • CP-26 cigarette lighter cable
  • MB-133 belt clip
  • Antenna
  • Hand strap

* May differ depending on version