NXR-1800E

NXR-1800E

NEXEDGE® VHF/UHF ANALOG & DIGITAL REPEATER

Light and Compact Analog UHF Repeater, 450-520 MHz, 45W RF Output Power, 32 Channels, Large OLED, Thermal-Controlled Cooling Fan, USB Audio Interface, NXDN or DMR Upgradable
Comes with 19 inch rack mounting brackets, rack handles, DC power cable, dual repeater bracket, rubber pads (qty 4), screws, instruction manual

NXR-1800E Features

 

  • UHF 450-520 40-1W RF Output Power (up to 40W @ 50%, 25W @ 100% Duty Cycle)
  • Light, Compact and Space-Efficient
  • 1.71-inch OLED with Icons and Numeric Displays
  • Thermal-Controlled Cooling Fan
  • Up to 32 Channels
  • Selectable Digital Protocol: DMR Tier II / NXDN Conventional*2 (programmable one at a time)
  • USB-A Connector for Audio Accessories
  • External In/Out Pin from DB25
  • Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digital*2
  • Hot Standby System Redundancy
  • Built-in IP Network Adapter
  • Unicast and Multicast Call Routing
  • SNMP protocol for network management
  • Supports G.711 Audio Codec (for Test console and Third-party Applications)
  • IP Remote Management (Monitor / Control / Programming / Test Console)
  • IPIF to External Applications (for IP Console, OTAP)
  • IP Network Voice Logging Interface*3
  • Built-in SIP IF (Digital Only)*1, *2
  • IP Remote Control Interface (IPRCI)
  • Enhanced Security (HTTPS)
  • CW ID
  • Multi-Site Conventional IP Network up to 16 Sites (for both Digital and Analog)*2
  • IP Networking Compatible with NXR-5000 (NXDN)*2, legacy KTI-3 (NXDN)*2 and KTI-5 (DMR)*2

NXR-1800E SPECIFICATIONS

 

General NXR-1800E
Frequency Range
Type 1
Type 2
1 450-520 MHz
2 400-470 MHz
Channel Capacity 32
Channel Spacing
Analog
Digital
25 / 12.5 kHz
12.5 / 6.25 kHz
PLL Channel Step 3.125 / 5 / 6.25 kHz
Power Supply 10.8 – 15.6 V DC
Current Drain
Standby
Transmitting
0.7 A
12.0 A (Max. power), 9.0 A (25 W)
Operating Temperature -22 °F to + 140 °F (-30 ºC to +60 ºC)
Frequency Stability ± 0.5 ppm
Antenna Impedance 50 Ω
Dimensions (W x H x D) Projections Not Included
8.21 x 1.73 x 8.33 in
(208.5 x 44.0 x 211.5 mm)
Weight Radio 4.18 lb (1.9 kg)
FCC ID
Type 1
Type 2
K44513200
K44513201
ISED Certification
Type 1
Type 2

Type 2 282F-513100

 

*25/30 kHz in VHF/UHF Bands excluding T-Band are not included in the models sold in the USA or US territories.
Analog measurements made per TIA603. Specifications are measured according to applicable standards.
Specifications shown are typical and subject to change without notice, due to advancements in technology.
Details and timing of firmware and software updates are subject to change without notice.

 

Receiver
Sensitivity
DMR (5 % BER)
DMR (1 % BER)
NXDN 12.5 / 6.25 kHz (3% BER)
Analog (12dB SINAD)
0.22 μV
0.28 μV
0.25 / 0.20 µV
0.25 µV
Selectivity
Analog @ 25 / 12.5kHz (TIA603)
Analog @ 25 / 12.5kHz (TIA603E)
83 / 74 dB
80 / 50 dB
FM Hum & Noise
Analog @ 12.5kHz
Analog @ 25kHz
50 dB
55 dB
Intermodulation 80 dB
Spurious Rejection 90 dB
Transmitter
RF Power Output 40 – 1 W (40 W @ 50% Duty, 25 W @ 100 % Duty)
Spurious Emission -80 dB
FM Hum & Noise
Analog @ 12.5kHz
Analog @ 25kHz
50 dB
55 dB
Audio Distortion 1%
Digital Protocol (DMR) ETSI TS 102 361-1, -2, -3
Emission Designator 16K0F3E, 11K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60FXW, 7K60F7W,
8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D

 

NXDN is a registered trademark of JVCKENWOOD Corporation and Icom Inc.
NEXEDGE® & FleetSync® are a registered trademarks of JVCKENWOOD Corporation.
AMBE+2 is a trademark of Digital Voice Systems Inc
All other trademarks are the property of their respective holders.