IP730D Series
IP730D Series Features:
- Record and playback up to 4 minutes or a max of 10 messages
- Vibration alert function
- Surveillance function
- AquaQuake™
- DTMF code transmission with optional DTMF microphone, HM-245T
- 500 memory ID address book
LTE / IDAS™ / Analog Portable
Icom’s IP730D is a revolutionary hybrid radio. With dual PTT buttons, the IP730D transmits and receives LTE, IDAS and analog networks to create nationwide coverage. The IP730D offers flexibility and assurance. Wherever coverage is needed, the IP730D is ready.
Channels: |
128 channels | |
Output Power: |
5W | |
Frequencies: |
136-174, 400-512 | |
Digital Conventional: |
IDAS™ built-in | |
LTE: |
Built-in | |
GPS: |
Built-in | |
Bluetooth®: |
Built-in | |
Programmable keys: |
3 | |
Waterproof Rating: |
IP67 |
Dual Mode Operation
Dual PTT
The main PTT button is larger and sits above the slightly smaller sub PTT button. Program either PTT button as LTE or IDAS/analog. Two more programmable button sit below the secondary PTT button.
Dual Receive
Receive IDAS, analog and LTE signals at the same time. Prioritize between LTE or IDAS/analog calls by selectively raising the volume. Always stay up to date on both channels.
Bridge Mode
Connect to another site’s IDAS or LTE conversations with Bridge Mode. Bridge Mode links IDAS and LTE transmissions together, allowing LTE transmissions to go over LTE talkpaths or vice versa. Bridge mode does not work with the analog function.
LTE Mode
Talk on full-duplex communications, ideal for telephone style conversations. Transmit and receive at the same time. With Priority Interrupt Calling, break into on-going conversations to relay important messages. The built-in GPS receiver can transmit position data at intervals to RDT Live or RDT Pro.
IDAS™ Mode
IDAS mode allows interoperation with existing IDAS NXDN systems while still using LTE. When LTE communications unexpectedly go down, benefit from having a dedicated IDAS/analog system as a backup communication resource.
- Over-the-air-programming (OTAP), update radio functions over LTE signals
- Individual, group, and all calls
- 15-bit encryption digital voice scrambler
Emergency Features
Emergency and safety features such as Man Down, Lone Worker, and Motion/Stationary/detection are standard, along with the emergency button on top of the radio. If any of these functions are used, the signal is relayed to a controller or dispatcher via IDAS or LTE signals.
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
F7500 Series P25
F7500 Series P25
F7500 Series P25 Features
- P25 Phase 1 conventional
- P25 Phase 1 trunking and Phase 2 trunking optional licenses
- P25 voting scan (P25 conventional mode) optional license
- Enhanced dual-rate Vocoder, AMBE+2™
- Analog/digital mixed operation
- Over-the-Air Programming (OTAP) optional license
- Individual and group call
- Unit ID and talkgroup display on receive
- Status update and status query
- Short data message (up to 100 characters)
- GPS position and transparent data transmission optional license
- Call alert
- Phone number list
- Call log
-
IC-7100
IC-7100
IC-7100 Features
- Built-in SD card slot for voice storage and data cloning
- Built-in RTTY demodulator and decoder
- CW full break-in, CW receive reverse, CW auto tuning
- Band scope and SWR graphic display
- RF speech compressor controlled by the DSP
- Voice memory function
- Multi-function Meter
- 495 regular, 4 call, 6 scan edge and 900 DR mode repeater channels
- 4 channels TX voice memories
- ±0.5ppm frequency stability
- Auto reply function in D-STAR DV mode
- Digital callsign squelch and digital code squelch in D-STAR DV mode
- 12.5kHz IF output for DRM (Digital Radio Mondiale) receive
- DSP controlled AGC function loop
-
VE-PG4
VE-PG4
VE-PG4 Features
- RoIP Gateway Module
- Links To Existing Radio System
- Built-In RoIP, SIP gateway, IP router, IP PBX and IP communication
- Call Recording To USB Device
- GPS Position and Status Information from IP501H / IP501M LTE
- Serial Pass-Through Function To Extend The Communication Range
- Built-In SIP Server To Connect IP Phones
- Router Functions With VPN Tunnel
- Half-Width 1U Form Design
- Online Firmware Updates
- Management Features
- Despatcher Software
- Built-In Controller For The IP100H
- Easy To Set Up