IC-M410BB
VHF Marine Transceiver
Icom’s M410BB is a flexible black box fixed mount that provides VHF communications for vessels with limited helm space. The supplied CommandMic™ controls the radio for essential communications on the water.
High-Performance Black Box VHF Fixed Mount
Icom’s M410BB is a flexible black box fixed mount that provides VHF communications for vessels with limited helm space. The supplied CommandMic™ controls the radio for essential communications on the water.
Remote Stations: Up to 2
One CommandMic™ included with radio, HM195GB or HM195GW depending on the version
Output Power: 25W
GPS: Internal GPS GNSS Receiver, with external GPS antenna connection
NMEA: NMEA 2000®/ NMEA 0183® -HS
Waterproof Rating: IPX7
Clean Installation for Limited Helm Space
The M410BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out-of-sight, place up to 60 ft (18.3 m)* away from the CommandMic™.
*Two OPC-1541 cables are required for the 60 ft installation
CommandMic™ Stations
Add an additional CommandMic™ to extend communication points for boats requiring a second comms station. This is ideal for boats needing communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat.
the waterproof CommandMic™ can be used in open top areas even in rain or splash conditions.
Stows the RF unit out of sight space and pulls the CommandMic™ out of the console panel.
Class D DSC Functionality
On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel.
NMEA200® and NMEA 0183-HS®
The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.
Loud One-Way RX Hailer
The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.
Active Noise Cancelling
The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.
Other Features:
- AquaQuake™ function
- Anchor watch function
| M510BB | M410BB | M400BB | |
|---|---|---|---|
| CommandMic™ Stations | 3 stations (up to 2 options) |
2 stations (optional 1 station) |
1 station |
| Intercom function | Yes | Yes | No |
| Class D DSC & Distress | Yes | Yes | No |
| AIS Receiver | Yes | No | No |
| Integrated GPS (GNSS) receiver | Yes | Yes | No |
| Active Noise Cancelling | Yes | Yes | Yes |
| Voice Recording & Playback | Yes | No | No |
| NMEA Interface | NMEA 2000® NMEA 0183® -HS |
NMEA 2000® NMEA 0183® -HS |
NMEA 0183® |
| DSC Remote Control Interface | Yes (EN 300 338-8) | No | No |
| RX Hailer and Foghorn | Yes (one-way) | Yes (one-way) | Yes (one-way) |
General |
|
|---|---|
| Frequency range Tx Rx DSC |
156.025 ~ 157.425 MHz 156.050 ~ 163.275 MHz 156.525 MHz |
| Usable channels | USA, INT, CAN, WX channels |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* |
| Power supply requirement | 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) |
| Current drain (at 13.8 V DC) TX Max. power RX Max. audio |
5.5 A Max. 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) |
| Operating temperature range | –20°C ~ 60°C, –4˚F ~ 140˚F |
| Antenna impedance | 50 Ω nominal |
| Dimensions (Projections not included) RF unit (W × H × D) CommandMic™ (W × H × D) |
216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in |
| Weight (approx.) RF unit CommandMic™ |
890 g; 2 lb. 400 g; 14.1 oz |
Transmitter |
|
|---|---|
| Output power (at 13.8V DC) | 25 W, 1 W (High, Low) |
| Max. frequency deviation | ±5 kHz |
| Frequency tolerance | ±0.5 kHz |
| Spurious emissions | Less than –70 dBc (High power), Less than –56 dBc (Low power) |
| Residual modulation | More than 40 dB |
| Adjacent channel power | More than 70 dB |
Receiver |
|
|---|---|
| Sensitivity FM (at 12dB SINAD) DSC (at 1% BER) |
0.22 μV typical –7 dBμ emf typical |
| Adjacent channel selectivity FM DSC (1% BER) |
More than 70 dB More than 73 dBµ emf |
| Spurious response FM DSC (1% BER) |
More than 70 dB More than 73 dBμ emf |
| Intermodulation FM DSC (1% BER) |
More than 75 dB More than 68 dBµ emf |
| Hum and noise | More than 40 dB |
| Audio output power CommandMic™ Rx hailer |
More than 2 W (4 Ω, 10% distortion) More than 15 W (4 Ω) |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation. Showing specifications for the USA versions.
Applicable IP Rating
| Ingress Protection Standard | ||
| IC-M410BB | (Black Box RF Unit & CommandMic™, HM-195) | IPX7 (Waterproof) |
Supplied Accessories
- DC power cable (2 m)
- GPS antenna*
- DC Power Cable
- Microphone Hanger
- Connection cable, OPC-1540 (6.1 m, 20 ft)
- CommandMic™, HM-195GB
- Connector cap
- Mounting base
* GPS antenna is not supplied with the IC-M510BB and IC-M410BB USA versions.