IC-7850
IC-7850 Features
- Simplified RS-BA1 Remote Control
- Supports PSK63 as well as PSK31
- SD card slot for voice and data storage
- USB, Ethernet and S/P DIF Interfaces
- Enhanced Digital Voice Recorder
- Comfortable solid feel main dial
- Firmware updates can be made from an SD card or USB flash drive
HF/50MHz Transceiver - The Pinnacle of HF Perfection
Download the latest firmware updates
1.2kHz "Optimum" roofing filter
The IC-7850 utilizes a newly developed 1.2kHz roofing filter, greatly improving the in-band adjacent signal performance. This enhancement enables the up-conversion design of the IC-7850 to have excellent filter performance while providing a dynamic range that outperforms the competition in the 10kHz or less separation tests.
New local oscillator design
Breaking tradition, Icom employs a Direct Digital Synthesizer (DDS) along with a Phase Locked Oscillator for the IC-7850’s Local Oscillator (LO). The LO's C/N ratio excels beyond our competitors, and the noise components generated in both receive and transmit signals are reduced virtually below detection.
LO C/N Characteristics Comparisons 1st LO @ 14.1MHz
Brand A premium model
Brand B premium model
IC-7850
Improved phase noise
With the latest design of the LO, the IC-7850 will become the new benchmark for Phase Noise with –150dBc/Hz at 10kHz offset and –140dBc/Hz even at 1kHz offset. (Previous mark of Phase Noise excellence was –138dBc/Hz at 10kHz offset and –110dBc/Hz at 1kHz offset.)
Phase Noise Characteristics 1st LO @ 14.1MHz
Brand A premium model
Improved spectrum scope
By using the dedicated DSP for the Fast Fourier Transform (FFT) spectrum scope, the IC-7850 provides faster sweep speeds and better accuracy than other brand models, even the IC-7800.
| Span Width | 5kHz–1000kHz |
| Resolution *1 | 1 dot *3 |
| Sweep Speed | 29.3 samples/Sec *4 |
| Input Dynamic Range | 116dB *5 |
| Max. Sensitivity *2 | –39dBµ *5 |
*1 Number of dots shown at 60dB level, when receiving a signal
*2 Recognized level at the Spectrum Waterfall
*3 SPAN=More than 20kHz, SPEED=Slow
*4 SPAN=Less than 20kHz, SPEED=Fast
*5 SPAN=5kHz, SPEED=Slow
Dual scope function
Another scope enhancement in the IC-7850 is the ability to simultaneously "see" activity in both bands. This is useful when searching for multipliers on the Sub band while maintaining your operating frequency on the Main band.
Photo to the right depicts dual scope example (vertically aligned)
Enhanced mouse operation for the spectrum scope
Connect a mouse to the USB port to change the operating frequency, tune the frequency, switch Fixed and Center mode, adjust the sweep speed and more. Also, simply click on a signal on the scope and the frequency is automatically selected as your operating frequency.
Photo to the right depicts specturm waterfall.
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
F7500 Series P25
F7500 Series P25
F7500 Series P25 Features
- P25 Phase 1 conventional
- P25 Phase 1 trunking and Phase 2 trunking optional licenses
- P25 voting scan (P25 conventional mode) optional license
- Enhanced dual-rate Vocoder, AMBE+2™
- Analog/digital mixed operation
- Over-the-Air Programming (OTAP) optional license
- Individual and group call
- Unit ID and talkgroup display on receive
- Status update and status query
- Short data message (up to 100 characters)
- GPS position and transparent data transmission optional license
- Call alert
- Phone number list
- Call log
-
F5061D/F6061D
F5061D/F6061D
F5061D/F6061D FEATURES
- Channels: 512, 128 Zones
- Power: 50W (VHF), 45W (UHF)
- Size, weight: 1.77″H x 6.29″W x 5.90″D, 2.9 lbs.
- Included: mic, brackets, cable, voice scrambler
- LTR/Digital. (Analog only models also available.)
- Basic LTR, Digital Mixed Mode
- Analog-Only Models Available
- 8 DTMF Autodial Memories
- D-Sub Accessory Connector
- ANI Functions
- 2/5 Tone and DTMF
- CTCSS/DTCS Encode Decode
- MDC1200 Signaling
-
IC-9100
IC-9100
IC-9100 Features
- Built-in voice synthesizer announces operating frequency, mode and S-meter level
- User programmable band edge beep (can be disabled)
- VSC (Voice Squelch Control) function
- AFC function (FM/DV mode)
- RF speech compressor
- Microphone equalizer and adjustable transmit bandwidth
- Two preamplifier types for HF/50MHz bands: Preamp 1: Increases low level signal improving intermodulation characteristics, Preamp 2: High gain preamplifier
- 20dB built-in attenuator
- CTCSS and DTCS tone encoder and decoder
- Triple band stacking register
- Quick split function and frequency lock function
- RIT and ΔTx variable up to ±9.999kHz
- Audio equalizer function
- SSB/CW synchronous tuning automatically shifts the carrier point when switching between CW and LSB/USB modes
- 1Hz pitch tuning and display
- Program scan, memory scan, select memory scan, mode select scan and Δf scan
- Automatic tuning steps
- 9600bps data socket
- AH-4 control circuit
- Automatic repeater function* and one-touch repeater function.
(*USA and KOR versions only)
Reviews
There are no reviews yet.