iCOM Radios
Showing 97–108 of 213 results
-
IC-746PRO
IC-746PRO
IC-746PRO Features
- Triple band stacking register
- 2 types of preamplifier (Regular and Higain) for HF and 50MHz bands, 1 for 144MHz band
- 20dB RF attenuator
- Level adjustable noise blanker (101 steps)
- BPF function below 500Hz band width in SSB mode
- 1/4 speed dial tuning function for SSB-data, CW and RTTY modes
- 108 selectable DTCS and 50 selectable CTCSS with encoder/decoder
- 1750Hz tone encoder
- Optional high stability crystal unit, CR-338
- Up to 10 memo-pads temporarily store frequencies and modes
- Quick split function with split lock function
- ± 9.99kHz RIT and
TX - Band edge beep
- CI-V capability for PC control
- VOX
- Program, memory, select memory and F scans
- IF transmit audio monitor (SSB mode only; AF transmit audio monitor for the other modes)
- 102 memory channels
- 9600bps data terminal
- AH-4 control circuits
- Auto TS function
- Optional voice synthesizer unit, UT-102 announces the operating frequency, mode and S-meter level
- 1Hz tuning and indication
-
IC-751
IC-751
IC-751 Features
- All Mode
- Analog S/RF Meter
- 160 – 10 Meters
- All Mode Squelch
- 100 Hz Display
- CW break-in
- PBT
- 32 Memories
- Dial Lock
- RIT/XIT
- Noise Blanker
- Notch
-
IC-756
IC-756
IC-756 Features
- Triple Band Stacking Register
- 101 Memories
- RIT/XIT
- Noise Blanker
- VOX
- Multiple Display Formats
- Realtime Spectrum Display
- Twin PBT
- 100 Watt Output
- Built-in Auto Antenna Tuner
- Preamp
- Speech Compressor
- 100% Duty Cycle
- Automatic Notch
- 1 Hz Readout
- Memory Keyer
- RF Attenuator 6/12/18 dB
- Automatic Notch
-
IC-756PRO
IC-756PRO
IC-756PRO Features
[ Antenna and receiver ]
- Built-in highspeed auto antenna tuner
- 2 TX/RX antenna connectors and RX antenna connector
- 30kHz–60MHz general coverage receiver*
- Built-in RX attenuator (6/12/18dB)
- Twin peak audio filter for RTTY reception
* Depending on version
[ Transmitter ]
- Tx monitor function
- Tone encoder
- VOX operation
- All mode power control
- External Control for Voice Memory and Memory Keyer
[ CW mode ]
- CW Wave form controlled by the DSP
- Multi-function electronic keyer includes adjustable keying speed and dot/dash ratio, polarity, bug keyer
- Continuously adjustable CW pitch control from 300–900Hz
- Double key jacks (Front and rear panels)
- Full break-in (QSK)
- CW reverse
[ Operation ]
- Set mode menu for speedy setting
- Analog and digital meter indicates relative output power, SWR, ALC level and compression level
- Memory pad stores up to 5 or 10 operating frequencies and modes
- Quick split function
- RF gain and squelch control
- ±9.999kHz Adjustable RIT and ΔTX • 1Hz step tuning and display
- 101 memory channels with 10-character channel name
- Optional Voice synthesizer announces the operating frequency, mode and signal strength in English
- Program, memory, select memory, Δf scans
- Auto tuning step function Dial lock
- Band edge beep (can be disabled)
- AH-4 control circuit
- Automatic tuning speed
- CI-V interface with optional CT-17 for PC remote control
-
IC-756PROII
IC-756PROII
IC-756PROII Features
- Voice Keyer
- 101 Alphanumeric Memories
- RIT/XIT
- Noise Blanker
- Multi-function Analog Meter
- Realtime Spectrum Display
- Twin Digital PBT
- Voice Recorder
- SSB/CW Synchronous Tuning
- CW Pitch
- Clock with Timer
- Built-in Auto Antenna Tuner
- TCXO Built In
- 100 Watt Output 100% Duty Cycle
- Built in RTTY Demod
- DSP Notch
- 1 Hz Readout
- Memory Keyer
- RF Attenuator 6/12/18 dB
- Automatic Notch
- Triple Band Stack Registers
- Dual Watch
-
IC-756PROIII
IC-756PROIII
IC-756PROIII Features
[ Antenna and receiver ]
- Built-in highspeed auto antenna tuner
- 2 TX/RX antenna connectors and RX antenna connector
- 30kHz–60MHz general coverage receiver*
- Built-in RX attenuator (6/12/18dB)
- Twin peak audio filter for RTTY reception
* Depending on version
[ Transmitter ]
- Tx monitor function
- Tone encoder
- VOX operation
- All mode power control
- External Control for Voice Memory and Memory Keyer
[ CW mode ]
- CW Wave form controlled by the DSP
- Multi-function electronic keyer includes adjustable keying speed and dot/dash ratio, polarity, bug keyer
- Continuously adjustable CW pitch control from 300–900Hz
- Double key jacks (Front and rear panels)
- Full break-in (QSK)
- CW reverse
[ Operation ]
- Set mode menu for speedy setting
- Analog and digital meter indicates relative output power, SWR, ALC level and compression level
- Memory pad stores up to 5 or 10 operating frequencies and modes
- Quick split function
- RF gain and squelch control
- ±9.999kHz Adjustable RIT and ΔTX • 1Hz step tuning and display
- 101 memory channels with 10-character channel name
- Optional Voice synthesizer announces the operating frequency, mode and signal strength in English
- Program, memory, select memory, Δf scans
- Auto tuning step function Dial lock
- Band edge beep (can be disabled)
- AH-4 control circuit
- Automatic tuning speed
- CI-V interface with optional CT-17 for PC remote control
-
IC-7600
IC-7600
IC-7600 Features
[Antenna connectors]
- Two Tx/Rx antenna connectors with automatic antenna selector
- Rx antenna In/Out connector for receiver antenna or external alttenuator
[Receiver]
- General coverage receiver covers from 30kHz to 60MHz
(* Some frequency bands are not guaranteed, depending on version) - Two types of receiver preamplifiers: Preamp 1: Increase low level signal improving intermodulation characteristics Pream 2: High gain preamplier
- Built-in 3-step RF attenuator (6,12 and 18dB)
[Transmitter]
- Tx monitor
- 50 CTCSS tone encoder and decoder
- All mode power control
- VOX capability (Voice operated transmission)
[CW mode]
- Multi-function electronic keyer with adjustable keying speed, dot-dash ratio and paddle polarity and bug key function
- DSP controlled CW keying waveform shaping
- Frequency lock function for split operation
- The normal (default) CW carrier point is selectable from USB and LSB
- APF (audio peak filter) function with soft/sharp filter shape
- Double key jack system
- Full break-in function and semi break-in function
- CW pitch control from 300 to 900Hz
- Adjustable CW envelope
[Operation]
- Set mode function for flexible and speedy setting
- Memory pad stores up to 10 (or 5) operating frequencies
- Quick split function enables split operation with a single action
- Digital meter indicates output power, ALC level, SWR, COMP (compression level), Id (drain current of the final amplifier) and VD (voltage of the final amplifer)
- Single knob control from squelch volume to RF gain
- RIT and ∂Tx variable up to ±9.999kHz
- Quick RIT/∂TX clear function
- UTC/Local Clock and timer function
- 1Hz pitch tuning and 1Hz indication
- 101 memory channels with 10-character comment
- Built-in voice synthesizer announces operating frequency, mode and receiving signal strength
- Programmed scan, memory scan, select memory scan, VSC scan and ∂F scan
- Auto tuning step function
- Band edge beep
- Main dial tension control and dial lock
- CI-V interface capability and RS-232C connector for PC connection
- AH-4 control circuit
- Triple band stacking register
- FFT scope wave averaging function
- Screen saver function
-
IC-7610
IC-7610
IC-7610 Features
- Built-in automatic antenna tuner
- Digital-Up-Conversion (DUC) for clean transmit
- Dual receivers, dual spectrum scopes
- DVI-D connector for an external display
- SD memory card slot for saving data
- I/Q signal output
- Memo pad stores up to 10 operating frequencies and modes
- Quick split function
- Quick Dualwatch function
- RF gain and squelch control with a knob
- RIT and ΔTX variable up to 9.999 kHz
- UTC/local clock and timer function
- 1 Hz pitch tuning and display
- Dial lock function
- Adjustable main dial brake
- External speaker jacks for Main and Sub receivers
- Screen saver function
- Multi-function meter (S-meter, Power, ALC, COMP, SWR, ID, VD and TEMP)
- Auto tuning step function
-
IC-7700
IC-7700
IC-7700 Upgrade Model Features
- Spectrum Waterfall Display: Review RF and AF characteristics on the IC-7700’s impressive 7-inch color LCD. Includes a wide screen setting.
- PC Mouse Operation: Connect a mouse via USB to select operating frequency and control the spectrum scope.
- Audio Scope Function: Review the FFT scope with waterfall and oscilloscope. In CW mode, observe mic compressor level and other attributes.
- Direct Remote Control Operation: Connect directly to an IP network using Icom’s optional RS-BA1 software and the IC-7700’s internal base station function. (A user operation PC is still required; a base station PC is not.)
- Digital Voice Recorder: Automatically capture incoming/outgoing calls onto an external memory card or flash drive.
-
IC-775DSP
IC-775DSP
IC-775DSP Features
- All Mode
- Analog S/RF Meter
- 180-10 Meters
- Audio Peak Filter
- VOX Function
- IF Notch
- 1 Hz tuning
- Automatic Antenna tuner
- Auto Antenna Selection
- Memory Keyer
- Preamp
- CW Keyer
- LPF/HPF
- IF Monitor
- Digital AF Automatic Notch
- Digital Narrow CW
- Digital Noise Reduction
- Three Scanning Types
-
IC-78
IC-78
IC-78 Features
- Built-in mic. compressor increases average talk power
- Complete CW features
- Variety of scanning function types
- IF shift interference rejection
- Built-in antenna tuner control circuit and selectable antenna tuner
- Hand microphone is supplied
- VOX capability
-
IC-7800
IC-7800
IC-7800 Features
All of the following CW capabilities are included in the IC-7800:
- DSP controlled CW keying waveform shaping
- Multi-function electronic keyer with adjustable keying speed from 6–60 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
- CW pitch control from 300 to 900Hz (5Hz pitch)
- CW-Reverse mode operation with selectable normal (default) carrier point
- Double key jack system (front and rear panel)
- Full break-in and semi-break-in functions
- CW/AM auto tuning function helps to zero in on intended signals within ±500Hz range
- 4 channels of memory keyer with 70 characters of transmit memory
- Bug keyer and microphone up/down keyer
