NX-5100/5800/5900

NX-5100/5800/5900

VHF/UHF DIGITAL TRANSCEIVERS

 

Frequency Band:
VHF/UHF/700MHz/800MHz

Frequency Range:
136-174 MHz / 450-520 MHz, 380-470 MHz / 763-776, 851-870 MHz

Power Output:
5W – 50W / 5W – 45W / 2W – 30W, 2W – 35W

Number of Channels/Groups/Zones:
1024 Channels / 128 Zones (Up to 4,000 with option)

Channel spacing:
12.5 / 15 / 25 / 30 kHz, 12.5 / 25 kHz Analog
6.25 / 12.5 kHz Digital

NX-5100/5800/5900 Features

 

ONE RADIO, MULTI-PROTOCOL SUPPORT.

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs — NXDN, DMR and P25 (Phase 1 & 2) — plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace — whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. An NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/ NXDN, FM/NXDN/P25, and FM/DMR/P25.

 

NXDN:
A desired CAI can be selected at will – whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while.
The NXDN air interface can fit into the very narrow 6.25 kHz bandwidth using FDMA technology. Ensuring spectrum efficiency, wide coverage and virtually unlimited scalability, it provides for nationwide expansion: Type-C Trunking Gen2 offers enhanced features, flexibility and performance, linking up to 1,000 sites or 24 networks.

 

DMR:
For simple conventional communications, making use of existing infrastructure, DMR is an excellent, cost-effective solution. Being energy-efficient, it offers longer battery life. And thanks to 2-slot TDMA, it is possible to obtain 2 talk paths within an analog 12.5 kHz bandwidth, thus doubling the capacity. The NX-5000 Series supports Tier II conventional mode.

 

P25:
This digital CAI ensures interoperability among public safety agencies in North America, Australia and New Zealand. The NX-5000 Series is compatible with Phase 1 (conventional and trunked), and Phase 2 (trunked).

 

INTUITIVE DISPLAY & OPERABILITY:MOBILES

 

 

Full-color display and more

Integrated luminance sensor on a 2.55-inch (154 x 422 pixel) 65,536-color TFT display automatically adjusts the brightness of the backlight. On the screen, text data is shown in multi-line, as much as 5 lines.

 

Detachable front panel

The front panel can be removed and used as a remote controller. Also the Featured Panel* and RF Deck can be purchased separately to create Multiple Configurations.

 

RENOWNED KENWOOD AUDIO

 

 

Clear Communications Even in Noisy Environments.

In addition to sophisticated sound analysis and optimization technologies, these radios feature Active Noise Cancelling based on leading-edge digital technology to offer clear communications even in very noisy environments.

TOUGH & ROBUST

MIL-STD Environmental and Ingress Protection Standards

During the development stage, NX-5000 Series radios go through a number of stringent tests as shown below. As a result, the portable radios complying with IP67/68 immersion standards offer max. 2-hour protection at a depth of 1 meter*, while the mobile radios comply with IP54/55 dust/water ingress protection standards.

*Applies for IP68

FEATURE PACKED

BUILT-IN BLUETOOTH®

BUILT-IN BLUETOOTH®Hands-free operation is vital for many NX-5000 users. The radios’ built-in Bluetooth® module is compatible with Headset and Serial Port Profiles (ver. 3.0) and keeps your hands free.

GPS TO TRANSMIT YOUR POSITION

Featuring an integrated GPS module and antenna, NX-5000 portable radios can transmit positional data, enabling effective management when used with tracking applications like KAS-10 software. Mobile models can support GPS with the optional KRA-40G.

SD CARD SLOT

For storing voice and data, memory capacity can be increased up to a huge 32GB on a microSD card.*

* Purchase a card separately

ENCRYPTION EQUIPPED

Secure communications are an essential requirement, especially for public safety applications.

NX-5000 radios are equipped with 56-bit key Data Encryption Standard (DES) encryption. For even higher protection the radios can support 256-bit Advanced Encryption Standard (AES) encryption with optional module.

SENSORS FOR USER SAFETY

Man-down Detection, Stationary Detection, or Motion Detection will be automatically engaged when the embedded acceleration and tilt sensors detect unusual behavior. Lone Worker function automatically places the radio in Emergency Mode if it is not operated for a certain period of time.

The bright orange Emergency Button is located at the top (portables) or front (mobiles) of the radio for high visibility and instant access when needed.

 

MULTIPLE CONFIGURATIONS

 

 

Create a variety of configurations to suit diverse requirements

The NX-5700(B)/5800(B) mobile radios allow users to create a variety of configurations to suit diverse requirements by combining different options.

Other Features

 

 

- Multi-Digital + FM Analog Operation
・Gen2 & NXDN® Conventional/Type-C Trunking Protocol
・DMR Tier II Conventional
・P25 Conventional/Trunking (Phase 1/Phase 2)
- FM Analog Conventional & LTR Zones
- Color 2.55" (154 x 422 pixel) TFT Display
- Color GUI and Multi-line Text Display
- 4 W/4 Ω; 3 W/4 Ω for the Remote Control Head
- 6 Front PF keys & 4 Up / Down Selectors
- Emergency Button
- MDC-1200
- FleetSync®/II
- Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones

NX-5100/5800/5900 SPECIFICATIONS

Mobile Radios
GENERAL NX-5700 NX-5800 NX-5900
Frequency Range 136-174 MHz Type 1: 450-520 MHz
Type 2: 380-470 MHz
RX: 763-776, 851-870 MHz
TX: 763-776, 793-806,
806-825, 851-870 MHz
Max. Channels Per Radio 1024 (Up to 4000 channels with option)
Number of Zones 128
Max. Channels Per Zone 512
Channel Spacing Analog 12.5/15/20/25/30 kHz 12.5/25 kHz 12.5/25 kHz
Digital 6.25/12.5 kHz
Power Supply 13.6 V DC ±15 %
Current Drain Standby 0.45 A
RX 2.3 A
TX 13 A
Operating Temperature -22° F to +140 °F (-30 °C to +60 °C)
Frequency Stability ±1.0 ppm
Dimensions
(W x H x D)
Radio w / Control Head (KCH-19) 6.69 x 1.89 x 6.93 in
(170.0 x 48.0 x 176.0 mm)
6.73 x 1.89 x 7.72 in
(171.0 x 48.0 x 196 mm)
Weight (Net) Radio w / Control Head(KCH-19) 3.53 lbs (1.6 kg)
FCC ID Type 1 K44471100 K44471200 K44478500
Type 2 K444712011
IC Certification Type 1 282F-471100 282F-478500
Type 2 282F-471201
Sensitivity NXDN 6.25 kHz Digital
(3 % BER)
0.20 μV
NXDN 12.5 kHz Digital
(3 % BER)
0.25 μV
DMR Digital
(5% BER)
0.25 μV
DMR Digital (1% BER) 0.40 μV
P25 Digital
(5 % BER)
0.25 μV
P25h Digital
(1 % BER)
0.40 μV
Analog
(12 dB SINAD)
0.25 μV
Selectivity Analog @ 12.5 kHz 71 dB 70 dB
Analog @ 25 kHz 81 dB 78 dB
Intermodulation 80 dB
Spurious Rejection 85 dB
Audio Distortion 2 %
Audio Output Power 4 W/4 Ω (Remote Control Head: 3 W/4 Ω)
TRANSMITTER
RF Power Output Power 50 to 5 W 45 to 5 W 30 to 2 W (700 MHz)
35 to 2 W (800 MHz)
Spurious Emission -73 dB -75 dB -80 dB
FM Hum & Noise Analog @ 12.5 kHz 45 dB 40 dB
Analog @ 25 kHz 50 dB 45 dB
Audio Distortion 2 %
Emission Designator 16K0F3E, 14KOF3E*, 11K0F3E, 8K10F1E, 8K10F1D, 8K10F1W, 8K30F1E,8K30F1D, 8K30F7W, 7K60FXE, 7K60FXD, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D

*1: Blowing rain protection for the mobile radio’s Remote Control Head only.
*2: IP54: RF Deck of the mobile radio; IP55: Remote Control Head for the mobile radio