PD562i
PD562i Features:
Packed with functionality, the Hytera PD562i portable digital radio impresses with its safety features and flexibility to support for both digital and analog communications, ideal for manufacturing, events and hospitality environments.
PD562i - Lightweight, robust digital two-way radio
HYTERA PD562 DMR PORTABLE UHF 4-WATT RADIO
Boasting 512 channels in a compact (9.9 oz) design, the Hytera PD562i portable UHF radio is a reliable and durable communication tool. It’s approved to IP54 and MIL-STD 810 testing. Its long-lasting battery will operate for approximately 16 hours under a 5-5-90 duty cycle in digital mode.
With both digital and analog capabilities, the PD562i also offers basic encryption & scrambler features when you switch over to analog.
ADDITIONAL FEATURES
- Sleek design – Injection molding (dual color) with dimensions of 4.53” X 2.13: X 1.18” coming in just under 10 ounces of total weight
- Durable Standards – Earned an IP54 (5: General protection against dust; 4: Protected against the effect of light rain or minor water splashes) performance rating and also complies with MIL-STD-810 C/D/E/F/G standards
- Analog Compatibility – Can work using multiple, advanced analog mode signals, including HDC1200, 2-tone, and 5-tone, which allows integration into teams using other analog handheld devices
- DMR Certified – Data protocol on the PD562i is fully compliant with DMRA standards
- One Touch Programmable – Fully supports One Touch features, like pre-programmed Text or Voice Call
- True 2-Slot – Merge two different talk paths to operate on the same frequency when using direct mode
- Virtual Trunking – Communicate with everyone on your team in urgent situations
- Upgradable Commands – Activate radio enable, radio disable, priority interrupt, and remote monitor functions with an optional license upgrade
General data
|
|
Frequency range
|
VHF: 136 - 174 MHz
UHF: 400 - 470 MHz |
Channel capacity
|
512
|
Number of zones
|
32
|
Channel spacing
|
12.5/20/25 kHz
|
Operating voltage
|
7.4 V
|
Battery
|
1500 mAh Li-Ion
|
Battery service life(5-5-90 duty cycle)
|
approx. 11 hours (analog)
approx. 16 hours (digital) |
Frequency stability
|
±0.5 ppm
|
Antenna impedance
|
50 Ω
|
Dimensions (H×W×D)
|
4.53 x 2.13 x 1.06 inches
|
Weight
|
9.17oz
|
Transmitter
|
|
RF Power Output
|
VHF: 1 / 5 W
UHF: 1 / 4 W |
FM Modulation
(Analog Emissions Designator) |
11 KΦF3E at 12.5 kHz
14 KΦF3E at 20 kHz 16 KΦF3E at 25 kHz |
4FSK Digital Modulation
(Digital Emissions Designator) |
12.5 kHz (data only): 7K6ΦFXD
12.5 kHz (data and voice): 7K6ΦFXW |
Conducted/Radiated Emission
|
-36 dBm < 1 GHz
-30 dBm > 1 GHz |
Modulation limiting
|
±2.5 kHz at 12.5 kHz
±4.0 kHz at 20 kHz ±5.0 kHz at 25 kHz |
FM Hum & Noise
|
40 dB at 12.5 kHz
43 dB at 20 kHz 45 dB at 25 kHz |
Adjacent channel selectivity
|
60 dB at 12.5 kHz
70 dB at 20/25 kHz |
Audio Response
|
+1 dB to -3 dB
|
Audio Distortion
|
≤ 3%
|
Digital vocoder type
|
AMBE++ or SELP
|
Digital Protocol | ETSI-TS102 361-1, 2&3 |
Receiver
|
|
Sensitivity (analog)
|
0.22 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD) 0.4 μV (20 dB SINAD) |
Sensitivity (digital)
|
0.22 μV / BER 5%
|
Adjacent channel selectivity
TIA-603 ETSI |
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz |
Intermodulation
TIA-603 ETSI |
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz |
Spurious response rejection
TIA-603 ETSI |
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz |
Hum and noise
|
40 dB at 12.5 kHz
43 dB at 20 kHz 45 dB at 25 kHz |
Nominal audio power output
|
0.5 W
|
Nominal audio distortion
|
≤ 3 %
|
Audio sensitivity
|
+1 dB to -3 dB
|
Conducted spurious emission
|
< -57 dBm
|
Environmental Specs
|
|
Operating temperature range
|
-30 °C to +60 °C
|
Storage temperature range
|
-40 °C to +85 °C
|
ESD
|
IEC 61000-4-2 (level 4)
±8 kV (contact discharge) ±15 kV (air discharge) |
Protection against dust and moisture
|
IP54
|
Shock and vibration resistance
|
MIL-STD-810 C/D/E/F/G
|
Relative humidity
|
MIL-STD-810 C/D/E/F/G
|