RadioGrips® Silicone Case for Bantam Radio – Safety Orange
RadioGrips® Silicone Case for Bantam Radio – Safety Orange
- Custom Silicone Case in Safety Orange.
- For grip and durability! Radios still fit in the charger!
- Also available in Black.
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
HS4Y-DC Headset
HS4Y-DC Headset
HS4Y-DC Headset – Behind the Head Dual Earmuff Headset with Push-To-Talk on Earmuff – Yellow with David Clark Pinout
- Push-To-Talk on Left Earmuff
- Adjustable Head Bands to Custom Fit
- Strong Flexible Noise Cancelling Dual Diaphragm Microphone
- Premium Gel Earmuff Pads
- Detachable Coil Cable
- Coil Cable Sold Separately – HS4-CAB
- SNR rating 33db H=33db M=32db L=24dB
-
HS3G Headset
HS3G Headset
HS3G Headset – Lightweight Flex Over the Head Dual Earmuff Headset – Green with noise-canceling boom
-
- • Lightweight and Tight Collapsible Frame
- • Adjustable, Flexible, and Comfortable Firm Fit
- • Strong Flexible Noise Cancelling Dual Diaphragm Microphone
- • Foam Replaceable Earmuff Pads
- • Detachable Coil Cable Located on Left Earmuff
- • Cable Sold Separately – HS-PTTCAB
- • Works with all Radio Models
-
-
TM2 THROAT MIC
TM2 THROAT MIC
TM2 THROAT MICROPHONE ADJUSTABLE, ACOUSTIC TUBE WITH INLINE PTT AND EXTRA TIP
Absorbing vibrations directly from the throat offer a number of advantages over conventional microphones. Boom mics cannot function in high-noise and high-wind environments because they are sensitive to all sounds carried by air. Throat mics, however, pick up only vibrations from the throat and are insensitive to background noise and wind turbulence. They can be worn with helmets, masks, HAZMAT suits, and full-face breathing apparatuses. Because they do not interfere with the use of other equipment and are highly adaptable to a variety of extreme acoustic environments, throat mics are ideal for a wide variety of tactical and recreational applications.
- Acoustic Tube Earpiece
- Straight Cable with Inline PTT
- Covert Finger PTT Included
- Adjustable Neckband for comfort
Reviews
There are no reviews yet.