IC-T70A / IC-T70E

IC-T70A / IC-T70E Features:

WX channel and WX alert function (USA version only)
Power save function
SMA type antenna connector
Automatic repeater function (USA version only)
1750 Hz tone for European repeater access
TOT (time out timer) setting
Repeater lockout and busy channel lockout
PC programmable with optional CS-T70
Transceiver-to-transceiver cloning (Optional)
Direct keypad frequency entry
16 DTMF autodial memories
Auto power off
LCD backlight
Wide/narrow channel spacing

Category: iCOM Radios

Description
IC-M94D Specifications
Reviews (0)

Rugged Construction, Classic 2M/70CM Operation

Impressive audio output volume, long-lasting power, plenty of memory channels, rugged construction, rich in analog features – the T70A offers practical 2m/70cm dual band operation and ruggedness, updated for today's ham radio enthusiasts.

700mW Loud Audio

The IC-T70A HD users a BTL (bridge-tied load) amplifier that doubles the audio output. Every ham knows that power = current × voltage. The T70A’s BTL increases the audio output by doubling the voltage delivered to the speaker. The 36mm large speaker delivers 700mW of loud and intelligible audio* even in noisy environments.
*Typical value using internal speaker.

Long Lasting Battery Life

Get 5W of power on VHF and UHF in a small, lightweight package. Get up to 19 hours* of operating time with the T70A HD power version, which includes a Li-ion battery pack (BP-265) and rapid charger (BC-193). All that power comes is an easy to hold and use size – not too big, not too small. The T70A Sport version, ideal for long storage or quick back-up, features an AA alkaline battery case instead of a charger/rechargeable battery pack.
* Typical value using internal speaker.

External DC power jack

An external DC power jack allows for operation and charge when used with an external DC power supply (10-16V DC).*
The BP-265 cannot be charged using the external DC power jack.

A Total of 302 Memory Channels

With 302 alphanumeric memory channels, including 50 band edges and 2 call channels, the IC-T70A HD gives you flexible scanning lists. With a maximum of 26 memory banks*, you can pick and choose the desired banks for scanning from the 250 memories.
Up to 100 channels per bank.

Built-in CTCSS/DTCS

CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. Pocket beep alerts you when a matching tone frequency is received. Tone scan detects the subaudible tone that is used for repeater access.

Internal VOX Function

The IC-T70A HD has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation when used with a compatible optional headset and plug adapter cable. Also, the VOX level and VOX delay time are adjustable.

IP54 and MIL-STD 810 Rugged Construction

Dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-T70A HD tested to and passed MIL-STD 810 environmental tests.

Other Features

WX channel and WX alert function (USA version only)
Power save function
SMA type antenna connector
Automatic repeater function (USA version only)
1750 Hz tone for European repeater access
TOT (time out timer) setting
Repeater lockout and busy channel lockout
PC programmable with optional CS-T70
Transceiver-to-transceiver cloning (Optional)
Direct keypad frequency entry
16 DTMF autodial memories
Auto power off
LCD backlight
Wide/narrow channel spacing

General

Frequency range	Tx	156.025–157.425 MHz
	Rx	156.050–163.275 MHz
	Rx (CH70)	156.525 MHz
	RX (AIS)	162.025 MHz
Usable channel groups		INT, USA, CAN, WX channels
Type of emission		16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK)
Current drain (at 7.2 V DC)	TX (6 W/1 W output)	1500 mA/700 mA (approx.)
Current drain (at 7.2 V DC)	RX (Inter SP/Exter SP Max. audio)	700 mA/350 mA (approx.)
Operating temperature range		–20°C to +60°C; –4˚F to +140˚F
Antenna impedance		50 Ω
Dimensions (W×H×D) (Projections not included)		60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in
Weight (approximately)		357 g ; 12.6 oz (With BP-306, antenna, MB-133)

Transmitter

Output power (Hi/Low)		6 W/1 W
Max. frequency deviation		±5 kHz
Frequency stability		±10 ppm
Spurious emissions		–68 dBc typical

Receiver

Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER)		0.25 μV typical –3 dBμ emf typical –107 dBm
Squelch sensitivity (Threshold)		0.25 μV typical
Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 73 dBμ emf 50 dB typical
Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 73 dBμ emf 50 dB typical
Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER)		70 dB typical 68 dBμ emf 50 dB typical
Hum and noise		40 dB
Audio output power (at 10% distortion)	Internal SP	1500 mW typical (8 Ω load)
Audio output power (at 10% distortion)	External SP	350 mW typical (8 Ω load)

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard	MIL-810 G
Standard	Method	Procedure
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Rain Blowing/Drip	506.5	I, III
Humidity	507.5	II
Salt Fog	509.5	–
Dust Blowing	510.5	I
Immersion	512.5	I
Vibration	514.6	I
Shock	516.6	I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Water	IPX7 (Waterproof protection)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

BP-306 battery pack
BC-251 battery charger
AC adapter*
CP-26 cigarette lighter cable
MB-133 belt clip
Antenna
Hand strap

* May differ depending on version

Reviews

There are no reviews yet.

Be the first to review “IC-T70A / IC-T70E”

IC-T70A / IC-T70E

IC-T70A / IC-T70E Features: