F7500 Series P25
F7500 Series P25 Features
- P25 Phase 1 conventional
- P25 Phase 1 trunking and Phase 2 trunking optional licenses
- P25 voting scan (P25 conventional mode) optional license
- Enhanced dual-rate Vocoder, AMBE+2™
- Analog/digital mixed operation
- Over-the-Air Programming (OTAP) optional license
- Individual and group call
- Unit ID and talkgroup display on receive
- Status update and status query
- Short data message (up to 100 characters)
- GPS position and transparent data transmission optional license
- Call alert
- Phone number list
- Call log
The F7500 series P25 mobiles support the ever-advancing P25 standard. The needs for both public service and public safety organizations are also addressed with the new P25 series. Icom’s third generation of this product not only captures the essentials, but offers dozens of new features and functions all in one new small form factor size. Public service and public safety organizations will like the built-in SD Card, GPS, USB interface, Bluetooth, and color display. Activation options for trunking, OTAR, OTAP and more, allow for expanded or upgraded services without burdening the user with unnecessary features. Icom is the choice when you want to take your P25 communications to the next level.
Channels: |
1024 channels w/128 zones | |
Output Power: |
50W VHF, 45W UHF, 35W 800MHz, 30W 700MHz | |
Frequencies: |
136-174MHz, 380-470MHz, 450-512MHz, 700/800MHz | |
P25 Conventional: |
Built-in | |
P25 Trunking |
Upgrade available | |
GPS: |
Built-in | |
Programmable Keys: |
7 | |
Waterproof Rating: |
IP55 |
Multiple Controller Configurations
The F7500 series mobiles allows the user to configure the radio three ways to suit almost any application or installation requirement. The intercom function is available between controllers and/or COMMANDMIC.
The new COMMANDMIC is an identical physical layout and user interface as the F7010. By installing in into a vehicle it allows a secondary remote control of the F7500.
Detached controller configuration
(with optional RMK-5 & separation cable)
Dual Head Controller configuration
(with optional RMK-7 & separation cable)
COMMANDMIC™ & Detached Controller configuration
(with optional RMK-7, HM-218 COMMANDMIC & separation cable)
Additional Features
- FIPS 140 Level 1 AES with Over-the-air Rekeying (OTAR) optional license and board
- Front panel programming optional license
- Hands-free communication with built-in Bluetooth®
- Tile designed keypad increases durability and visibility
- Programmable ringer peep
- USB port to connect to a PC
- Built-in 2-tone, 5-tone, CTCSS, DTCS & MDC1200 in analog
- Programmable D-SUB connector for external PTT, channel honr, PA/RX speaker, ignition switch and dimmer control
- TX/RX active noise canceller
- TX/RX audio equalizer
General
| Frequency range | Tx | 156.025–157.425 MHz |
|---|---|---|
| Rx | 156.050–163.275 MHz | |
| Rx (CH70) | 156.525 MHz | |
| RX (AIS) | 162.025 MHz | |
| Usable channel groups | INT, USA, CAN, WX channels | |
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (GMSK) | |
| Current drain (at 7.2 V DC) |
TX (6 W/1 W output) | 1500 mA/700 mA (approx.) |
| RX (Inter SP/Exter SP Max. audio) | 700 mA/350 mA (approx.) | |
| Operating temperature range | –20°C to +60°C; –4˚F to +140˚F | |
| Antenna impedance | 50 Ω | |
| Dimensions (W×H×D) (Projections not included) |
60.9 × 145.8 × 43.8 mm; 2.4 × 5.7 × 1.7 in |
|
| Weight (approximately) | 357 g ; 12.6 oz (With BP-306, antenna, MB-133) |
|
Transmitter
| Output power (Hi/Low) | 6 W/1 W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency stability | ±10 ppm | |
| Spurious emissions | –68 dBc typical | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
0.25 μV typical –3 dBμ emf typical –107 dBm |
|
|---|---|---|
| Squelch sensitivity (Threshold) | 0.25 μV typical | |
| Adjacent channel selectivity DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Spurious response DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 73 dBμ emf 50 dB typical |
|
| Intermodulation DSC receiver (at 1% BER) AIS receiver (at 20% PER) |
70 dB typical 68 dBμ emf 50 dB typical |
|
| Hum and noise | 40 dB | |
| Audio output power (at 10% distortion) |
Internal SP | 1500 mW typical (8 Ω load) |
| External SP | 350 mW typical (8 Ω load) | |
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications & IP Rating
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standards | |
|---|---|
| Water | IPX7 (Waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- BP-306 battery pack
- BC-251 battery charger
- AC adapter*
- CP-26 cigarette lighter cable
- MB-133 belt clip
- Antenna
- Hand strap
* May differ depending on version
Related products
-
IC-9700
IC-9700
IC-9700 Features
- All mode, tri-band transceiver covering 144, 430/440 as well as 1200MHz
- Supports CW/AM/SSB/FM/RTTY and D-STAR DV and DD modes
- Digital Data (DD) mode provides 128 kbps data communication
- PA provides a powerful 100W (144 MHz), 75W (430/440 MHz) and 10W (1200 MHz) output
- 4.3″ touch screen color TFT LCD
- Smooth satellite operation with normal/reverse tracking and 99 satellite channels
- Real-time, high-speed spectrum scope & waterfall display
- Dualwatch operation and full-duplex operation in the satellite mode
- Supports 2 wave simultaneous reception (different band / different mode), full duplex operation.
- D-STAR Terminal and Access Point mode (RS-MS3A/W)
- Dual D-STAR receive (decodes two voice streams simultaneously)
- Full duplex operation/Dual Watch (no V/V or U/U Capability)
- Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode)
- Audio Scope
- CW full break-n
- 0.5ppm frequency < +/- 0.5ppm (–10°C to +60°C; 14°F to 140°F)
- Voice Recording/playback function (SD Memory Card)
- Ethernet Port (Internal RS-BA1 Server)
- USB audio and control connection
- DR Memories: 2,500
-
RS-BA1
RS-BA1
RS-BA1 Features
- Low latency provides the same operational experience as using an actual radio plus high quality audio over an IP network.
- Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using CI-V commands.
- Remote power ON/OFF function wakes up the IC-7600 from standby mode.
-
F5121D/F6121D
F5121D/F6121D
F5121D/F6121D FEATURES
- Channels: 128, 8 Zones
- Power: 50W (VHF), 45W (UHF)
- Size, weight: 1.57″H x 5.91″W x 6.59″D, 2.4 lbs.
- Included: microphone, brackets, power cable
- 5 Levels of Mic Gain
- GPS Receiver Connection
- 4W Front-Mounted Speaker
- Lone Worker Function
- Programmable Buttons
- 8-Character Display
- 2/5 Tone
- MDC Signaling
-
F5400D/F6400D
F5400D/F6400D
Features
The F5400D series provides NXDN™ CAI-based IDAS digital model operation in IDAS conventional and multi-site conventional. The following IDAS features available:
- Analog/digital conventional mixed mode operation
- Upgrade to Type-D trunking
- Status
- Text message
- Radio check
- Stun, kill and revive
- Call alert
- Remote monitor
- And much more
Reviews
There are no reviews yet.